| Tape for trackday.
As mentioned, the best method is to ONLY put it on the lights... not the bodywork.
There are numerous products that will dissolve the glue (such as Goo Gone, WD 40, etc).
Contact Cleaner will also do it. The trick with Contact Cleaner is to put it on a paper towel and then hold the towel on the glue... do not scrape. Just let the fumes of the contact cleaner eat the glue and then remove the towel and wipe off the glue with a clean paper towel.
Wiping plastic with contact cleaner will cause it to cloud over.
Tony |