[ratm355]

-When i cleaned the carbs I only took of the float chamber to get to the jets and the diaphram to check the other side. I didn't take the entire thing apart. I also didn't change or adjust anything it i didn't know what it was. I only cleaned the valves, and replaced 1 of the diaphram springs.
-I bike ran fine before, it just wouldn't idle without the choke all the way out (at about 3000 rpm)
-Could i have meesed up the idle speed and the sync of the carbs even though i didn't really take too much apart, or touch anything i didn't know about? Would changing only 1 of the springs put the carbs out of sync?
I'll defiantely check though. Thanks