[nilez]

I wouldn't be so quick to chop an aftermarket pipe. Chopping a pipe isn't necessarily all that difficult, but then again, stock pipes are usually not made of any special materials. If you have a 2 bros, is it carbon fiber? That might not cut as easily or cleanly as you think with a hack saw. Titanium? You better get a haaaarrrrrdddd ass cutting blade... Of course I'm not telling you that you can't do it or shouldn't do it, just be mindful that it's an aftermarket pipe and is most likely made with more expensive materials that may not like to be cut. On that note, I might chop my stock cans on my R1 and put race baffles in it, so good luck to you!