Quote:
Originally Posted by SSearchVT  .............. Make a substitute for the fuse out of 12 or 14 gauge household wire then look for the smoke. Again - This is a bad idea - so do it at your own risk............. |
Ha ha ha. That was already done
It didn't help. I only left it hot maybe 10 seconds. Nothing.
Quote:
Originally Posted by SSearchVT ...........
There should only be a few wires on the Engine control circuit - take a look at the schematic in a hatnes manual - and trace them one by one. |
I worked on that too.
Finally I did it my way and feel I have it narrowed down. I took the relays out of the fuse block and replaced them one at a time. It blows when I put the relay in for the fuel pump.
My options now are:
1) check wires coming from fuel pump
2) replace relay
3) replace the fucking fuel pump
P.S. whoever chose the location for the CPS is a fucking asshole duche bag, who should have his balls cut off for acting like a female and not using logic in it's placement
: