Quote:
Originally Posted by yesterdayze  Hmm, I would be surprised. Did you get them out yet? I am curious now. Most push in because in order to get the tail on you put the rivets in from the outside. Metal rivets pull out because they deform then snap when you put them in. Plastic usually push in from the outside because you can't get to the inside to push them out and they are tool less so no insert and snap. Not saying you are wrong  honestly, so don't take it that way, just very curious if they do go the other way. |
Ya no worries, I appreciate you mentioning it...if you look at my past (#11), the first pic shows the plastic rivet things, you can kinda see on the left/bottom rivet in the pic that the center is pushed up into it and it has those 3 plastic things that extend out when that center is pressed back out/down to secure the bodywork.