0
For Sale
1998 KTM 250 EXC NH Street Plated and Titled, $1600/BRO
This bike is in great shape overall. Ridden by my son only.
- New FMF Gnarly Expansion Pipe
- FMF Quiet Q2 Pipe
- Brand New Top End with 1 hour it. Fully resleeved at Millenium technologies.
- Oversized Acerbis 3 gallon Black Fuel Tank
- New 7/8’ Handlebars, with Bark Busters
- Sprung and Valved for 185 lb rider. New Fork seals, no leaking.
- Street Plated in NH, NH Title as well
- Pirelli MT16 in rear 60% left, 75% left on the front.
- Extra Front Rim and Rotor
- Newer rear fender with Acerbis LED fender, also New Headlight
- Newer Brake pads, only 20 hours on the pads
- All KTM original Owners Manuals
- Additional KTM 250/300/380 Mechanics Manual in 3 ring binder
- WER Steering Stabilizer, removed from bike
- Including a Trail Tech Endurance Computer with extra computer, sensor lead and Billet mount. I bought this, but have not mounted it on the bike. You can do it if you choose to.
- Also includes used Carbon Pipe protector from OEM pipe. Might not fit the New Gnarly pipe exactly, but it will work for added protection.
- Skid Plate, mounted on bike.
- Anything that has been removed from this bike has been kept in a box with all other OEM parts taken off the bike.
Now for the rest.
- Scratches on the plastics, and this is to be expected, as its a used dirt bike.
- I currently have gas mixed in it at 30:1 since the top end is still essentially new (1 gallon worth), and you can continue to break the motor in as you would like moving forward. It was only ridden at approximately 50% throttle during the breaking process before I decided to take the motor apart and get it rebuilt.
- The bike is over 15 years old, so there is no title in NH that is current. When you buy it from me, I will include a bill of sale, the old Title that was given to me, and also the most recent street registration from 2013. This should be all you need to re-register it for the street in ME, NH or MA or any other state.
Sent Motor to Freedom Cycle to have a diagnostic done on engine due to transmission fluid being pulled in (this was after the Cylinder re-sleeve and top end being redone, only one hour on the top end). The motor was torn down, and new bearings needed to be installed to fix the problem. I tried to sell the bike with the motor taken apart, but no one was interested. So, I paid to have the motor rebuilt professionally and put it all back together. I bought all new parts, bearings and seal kits to have the motor rebuilt from top to bottom, and the motor is brand new except for the 1 hour that was placed on the replaced sleeve/Piston before the tear down and rebuild. Starts easy, shifts easily and is a great woods bike all around. Yo won't be disappointed.
The Millenium Technologies re-sleeving, new top and bottom end and the new expansion pipe/exhaust are almost as much as the cost I am selling the bike for. You can sell this bike with the plate and title for $1600 all day long. Super smooth, great woods bike, even though it’s a 98. Any questions, please ask.
PM me with questions. I want to move the bike out, but I am not in a hurry to give it away. I’m in Nashua, NH.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Reply With Quote
