[xrocket21]

I have another question. I lost all my blinkers and brake lights today, but still have rear driving lights. One of the relays came undone (shitty wiring from the previous owner) and Theres 2 bare wires, but I cant see any voltage on either. I am guessing when it was flopping around, I blew a fuse. Any idea which one and where I can find it? Bike starts, runs, and I have headlights and tail lights, but no blinkers and no brakelights.

Thanks!

edit: wires are grey and the other is white with a green stripe

edit: Got the wiring figured out:

Files: RC-51 wiring diagram

But I MUST have blown a fuse, where is it?

[union]

Originally Posted by xrocket21

I have another question. I lost all my blinkers and brake lights today, but still have rear driving lights. One of the relays came undone (shitty wiring from the previous owner) and Theres 2 bare wires, but I cant see any voltage on either. I am guessing when it was flopping around, I blew a fuse. Any idea which one and where I can find it? Bike starts, runs, and I have headlights and tail lights, but no blinkers and no brakelights.

Thanks!

edit: wires are grey and the other is white with a green stripe

edit: Got the wiring figured out:

Files: RC-51 wiring diagram

But I MUST have blown a fuse, where is it?

I think the fuse for that is under the left side panel in a little black box. You need to pull it off to get to it but its not that hard.

[xrocket21]

Thanks, you just saved me a lot of headache. Fuse replaced, wiring figured out, wired now soldered instead of twisted and taped

I now have brake lights and blinkers again!

Installed my plate light too, should be able to pull off an inspection