0
Just throwing this out there to see if there is any interest. I bought a 2003 Sportster back before I had my daughter and time was plentiful. The goal was to copy the Ryca Motor sportster cafe https://www.rycamotors.com/sportster...cer-kit-86-03/. I pretty much ran out of time and motivation to finish it. Currently have the clip on's mounted, new grips, 19" mag wheel, cafe seat with stitching to match the black and red tank, TC Bro's mid controls, Roland Sans LED indicator, gauge mount and had a wiring harness made up by Speed Demon Cycles. Has the rear frame cut down to accept the cafe seat. Cafe seat has the Ryca motor tail light, mount and wiring assembly. Bike has 13" HD socks to raise the rear end up. Could benefit from 15" shocks but don't appear to be necessary. Has black controls/ master cylinder/ levers and mounts.
What needs to be done?
- Cafe seat/ tail light needs to be wired. Quick and easy job all integrated into tail light. Tail light has run/turn/brake built in.
- Front wiring harness needs to be addressed. This was a 1200 Custom that had taller risers and all the wiring was jammed into the enclosed bar risers. I have a guy who said he would build a custom box to enclose everything and tuck it away/ keep it water tight. Haven't gotten far enough along that I've brought it to him to have this done yet though.
- Needs front indicators.
What's good?
-Bike starts and idles great.
-Has new tires
-Title in hand
-13k miles
Basically I'm at the point where I don't want projects or unfinished work. Just want a single bike garage for now. Track days and projects will have to wait until the future. Paid 3200$ for the bike. If there is any interest from members here my thought is about 1600$.