2
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
Continued downsizing... to help with move transitions, and since I have sold my track/street sport bike, I am thinking I can part with my trailer.
BigTex 30SA 8' length.
etrack anchors in 4 corners in addition to BigTex tie downs.
Full size spare.
Jack has swappable wheel and flat bases.
LED lighting.
Trailer is in very good shape.
COO in hand.
These are going for $2100-$2300 new.
Looking for $1350. Cash deal for a BRO.
Condor motorcycle stand and trailer mount bracket optional.
PM if you are interested.
I am in the Westboro area of MA.
PS: Trailer contents are not included![]()
Last edited by trider143; 05-21-22 at 06:53 AM. Reason: Add price, further descriptions.
Is that ramp capable of folding mostly into the bed and the trailer stood on its butt up against a wall?
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
Interesting question, as I had not thought of it before.
The ramp detaches by sliding from left to right (I think) to slide the pins out of the cylinders attached to the frame. So the ramp can easily be stored flat or upright.
After that, if you were to stand the trailer upright, the plate and lighting would be in contact with the surface, so you may have to have some supporting floor frame to stand it on to protect same.
Finally, you will need the mechanical advantage to get it upright and then secure it.
BigTex website says the gross trailer weight (ramp included) is 663#.
See https://www.bigtextrailers.com/30sa-single-axle-utility
![]()
fyi, now cross posted to CL, but without NESR discount.
https://worcester.craigslist.org/tro...492561729.html