0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
BRAND NEW Blizzak WS-80 215/55/16 mounted on BRAND NEW 16x6.5 5x114.3 or 5x108 combination wheel. Balanced with TECH PLUS balancing beads. $650.00
Google your vehicle bolt pattern to see if the are a fit.
Need these gone
BRAND NEW Blizzak with new Steel wheels 215/55/16
Last edited by timv2444; 01-04-16 at 08:17 PM. Reason: PRICE DROP
$$ PRICE DROP $$
$650
Fhackin A.
Cliff's Cycles KTM
NETRA enduro B-vet
Close your eyes, look deep in your soul, step outside yourself and let your mind go.
Where are you located ?
Live in Shirley,MA work in Framingham,MA
BUMP $625
Do you know if these are a high positive offset wheel? Also, what car were these originally going to be put on?
"...i would seriously bite somebody right in the balls..." -bump909
I was originally going to put them on my Ford focus ST. The calipers rub on the inside of the wheel so I cannot use them.
Last edited by timv2444; 01-07-16 at 06:40 PM.
That's my fear on my Mazda 6. 17's are stock but older base model versions of the same generation came with 16's. The car is particular about what 16's will work.
"...i would seriously bite somebody right in the balls..." -bump909
What size is your spare tire? Where are you located? Maybe we could meet up to test fit.
I had this issue with my Civic SI.
My new 2104 had 18" rims and my older 2008 SI had 17" rims which is what my snow tires are on. they just barely rubbed.
I just got a pair of 3mm wheel spacers and they work perfect.
![]()
Scuba, I tried 5mm and its better but inside diameter is a hair too small.
yeah, i wouldn't go any bigger than 5mm, they do make 7mm ones but then you're grabbing considerably less of the screw.
FWIW the steel rims Tirerack sells for the ST are 44 & 52 mm. You might look up the Mazda 6 and see if there is a "-1" fitment available, if so and the hub diameter is the same, good to go.
"...i would seriously bite somebody right in the balls..." -bump909
Zx12 I'm busy tonight, we could do tomorrow if you're working or Monday night. Let me know.
Tuesday night Bump. Still available.
$610 takes them.
Thanks again for letting me test fit them. Unfortunately the wheels didn't have enough positive offset which made them rub the inside of the quarter panel on a sharp edge when the suspension is loaded. They cleared everything else in the front.
My OEM wheels are 55mm positive offset and these wheels looked like they needed another 15mm or so for proper clearance in the rear. I never thought to look for the offset stamp on the wheels while I was in your garage.
I can attest that these tires and wheels are brand new and are a great deal at $610 if they will fit your car.
Last edited by ZX-12R; 01-12-16 at 10:07 PM.
"...i would seriously bite somebody right in the balls..." -bump909
BUMP. Anyone interested in the 215/55/16 tires only?
I'll sell just the tires if you could get them dismounted from the wheels and get me the wheels back. $525
Isn't there a forum for the vehicles they fit?
The calculus of hate
It is not that I should win it is that you should lose
It is not that I succeed it is that you fail
It is not that I should live it is that you should die