wanted:Gsxr front wheel

**TimTim** · 02-23-07, 05:22 PM

I am looking for a front wheel for a 2005 gsxr1000. All model year 2006 wheels will fit. I am also looking for a stock rotor for the same bike.

thanks,

Tim

timothy.r.byma@us.army.mil

**SVRACER01** · 02-23-07, 08:00 PM

are you sure its 320mm? mine are 320 i think and they are off an 02 and i know the 05 off of Kates bike was too small. i wanna say that they are 300mm

try ebay. got mine cheap for my G/F GSXR.

**TimTim** · 02-23-07, 08:10 PM

i've been keeping an eye on ebay. used front rims are still bringing over $300. I figured i'd ask around before buying on ebay.

i have a 320mm rotor with the new bolt pattern. i assumed that was stock.

**SVRACER01** · 02-23-07, 08:13 PM

i would measure it. the EBC site gives a different part# for 05 06 (radial brakes means smaller rotors) go through the list and find out what else takes that rotor. the ones i got for my G/F bike were for a Busa. same rotors as the gsxr and the TL.

i borrowed a front wheel off of Kates 05 750 and the rotor was smaller than my 02 calipers so i was only using 80% of the pad. i would just measure them. check the cm and add a 0 to make mm

**SVRACER01** · 02-23-07, 08:22 PM

just checked EBC and they say 310mm

**TimTim** · 02-23-07, 08:24 PM

i see now that 320 is oversized for the 05 gsxr1000....

i guess i need 2 then!

thanks for setting me straight.

**SVRACER01** · 02-23-07, 08:26 PM

did some change them on you? whats on there now 320?

05-06 GSXR1K
06 GSXR600 & 750 will fit your bike

**TimTim** · 02-23-07, 08:33 PM

i just got a cheap front end and swapped it on my '03 600... then i bought some rotors on ebay for the new radial set up but somebody screwed me over with one bent rotor.

when measuring, should i measure only the worn area where the brake pad has contacted?

well then, any rotor with the new bolt pattern will work. sweet.

**SVRACER01** · 02-23-07, 08:35 PM

just measure straight across the middle. the diameter of the WHOLE disc.

**TimTim** · 02-23-07, 08:37 PM

ok. still shopping for one rotor and rim. thanks.

**SVRACER01** · 02-23-07, 08:38 PM

its the right size?

**TimTim** · 02-23-07, 08:40 PM

yes sir.

**SVRACER01** · 02-23-07, 08:42 PM

kewl.

**SVRACER01** · 02-23-07, 09:00 PM

some of these buy it now ones look good

eBay - 06 gsxr front rotors, Parts Accessories, eBay Motors items on eBay.com

Busa will NOT fit

**BigShel** · 02-24-07, 10:45 AM

Whats up, I may have 2 front wheels for the 05-06 Gsxr100.I have to go through my storage.I had a shop a yr or so back doing chrome and all that custom shit.So I have mad parts but its too cold for me to be in that storage unit.But I will make a trip for you.PM me.

Thanks

**TimTim** · 02-24-07, 11:15 AM

sent

**SVRACER01** · 02-24-07, 06:35 PM

Originally Posted by UPANDCOMING

Whats up, I may have 2 front wheels for the 05-06 Gsxr100.I have to go through my storage.I had a shop a yr or so back doing chrome and all that custom shit.So I have mad parts but its too cold for me to be in that storage unit.But I will make a trip for you.PM me.

Thanks

hey you dont have any rear SV650 wheels in there or front rotors for an 02 GSXR750?

**TimTim** · 02-24-07, 06:56 PM

i have a rear gsxr rim. its the 5.5 inch (white in color)

**SVRACER01** · 02-24-07, 07:00 PM

nah, its for an SV650. i think thats a 4 or 4.5" rim. thanks though

**BigShel** · 02-24-07, 07:44 PM

I have 2001 TLs1000 wheels and one good front gsxr rotor.which is off a 02Gixxer1K. Will that work for you?

Originally Posted by SVRACER01

hey you dont have any rear SV650 wheels in there or front rotors for an 02 GSXR750?

**SVRACER01** · 02-26-07, 08:44 PM

do you know if the TLS front wheel is the same as a GSXR wheel? (i would assume so) how muchfor just the front? and how much for just the GSXR1K rotor?

wanted:Gsxr front wheel

Thread Tools