0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
Comes with the complete....... Ignition is a programmable ignitech with output for power valve control. Koso digital dash with shift light, twin EGT gauges, rides and handles perfect! Lots of custom work, comes with full body work but you will need to trim it a bit to a make it fit. Way to much work done to the chassis to fit the monster engine. The bike was a brand new with no miles, then tore down and converted. Ive got 0 miles on a complete rebuild, all new bearings, pistons, nickisil, etc.. engine alone is worth over $5k.... 2:36 streight cut gears, RZ 6 speed transmission, lockup clutch, billet side covers, DC stator, Cub cylinders, polished, v force reeds, new 36mm khein carbs, cool head with changeable domes.. pump gas engine. The bike is a UM V2S-250R, Built by suzuki for them.... it even has a suzuki title! great build quality and attention to detail. Title clean and in hand. The engine in the bike is a 100hp 440CC RZ engine...It is very quick! The engine pictured is the old one, the new rebuilt one is the same but has polished cyl for the bling look! $4900
email me for more info!
![]()
Last edited by DynoTune; 10-03-11 at 05:58 PM. Reason: .
Would you help with the new engine install?
I will help Guide you on the engine specs etc to make it smooth. Engine install would take like 1 hour. Thats the simple partMost affordable would be the rz350 engine... after that the banshee engine with a few simple mods. This project is for handy folks only, do your own work beacuse you will find nobody that wants to work on it LOL. Thank god you will have me guiding you
![]()
Last edited by DynoTune; 03-31-11 at 08:37 AM.
I have an English friend on here who is very handy with this sort of thing ...the key would be getting an engine.
I just think it would be fun to blip around on.
That radiator is the cats.
Fun to blip around on? You blip on scooters....not real bikes....LOL
Engines are super easy...tons everywhere....banshee engine is fine, $800 then swap the primary gears, dont need to even take the engine apart.... $300 for the gears... thats about it... Yes, im over simplifying it but its not hard nor very expensive...Would blip around pretty good with a 60hp engine...Maybe even blip you on your ass.......hehehe
The radiator is nice! I polished the end caps... thanks!
Last edited by DynoTune; 03-31-11 at 06:55 PM.
OMG!!! now thats a project i could really get into! wish i had the cash i would be all over it.
[SIGPIC]
So... lemme get this straight...
It's a Hyosung GT250.... with a Yamaha Banshee motor in it....
Plus
.... THAT EXPLAINS why the Hyosung frame... looks IDENTICAL to the GS500E/F frame...
They bought it from Suzuki....
Those clever Korean bastards.
I mean really... look at the frames:
The welds are even in the same place.
...
Either way... I kinda want it.
Last edited by AimlessMoto; 03-31-11 at 11:13 PM.
"Life is a tour, not a race... just stay out of my way when I'm touring!"
its nicer than the pics! Has a solo seat cowl on it now... 180 rear tire.... all new... You will need to use pre-mix unless you get an rz engine... first to see will buy!
Last edited by DynoTune; 04-01-11 at 12:02 PM.
Definitely would be a fun toy - but I need to wait until I have the necessary assistance to do an install. If it had a motor in it I would definitely be down!
I bet it smells awesome
I remember riding behind you and your 125 Aprilia![]()
Kill, it was my 250I dont think a 125 would have kept up LOL...
Kb1 you got a garage? buy the bike, the engine is the easy part! As long as your some what handy you can do it! Its super simple to work on.
Braptastic. Looks like a fun project.
2023 KTM 890 Adventure R
LOL.... at least you take direction well.....maybe for the first 5 beers...![]()
http://www.dynotunenitrous.com/store...nshee_bike.wmv
just short shifting, breaking it in...
Comes with the complete....... Ignition is a programmable ignitech with output for power valve control. Koso digital dash with shift light, twin EGT gauges, rides and handles perfect! Lots of custom work, comes with full body work but you will need to trim it a bit to a make it fit. Way to much work done to the chassis to fit the monster engine. The bike was a brand new with no miles, then tore down and converted. Ive got 0 miles on a complete rebuild, all new bearings, pistons, nickisil, etc.. engine alone is worth over $5k.... 2:36 streight cut gears, RZ 6 speed transmission, lockup clutch, billet side covers, DC stator, Cub cylinders, polished, v force reeds, new 36mm khein carbs, cool head with changeable domes.. pump gas engine. The bike is a UM V2S-250R, Built by suzuki for them.... it even has a suzuki title! great build quality and attention to detail. Title clean and in hand. The engine in the bike is a 100hp 440CC RZ engine...It is very quick! The engine pictured is the old one, the new rebuilt one is the same but has polished cyl for the bling look! $6000
email me for more info!
![]()
Last edited by DynoTune; 05-31-11 at 05:59 AM.
bump, updated....
bump.......bike with motor for sale![]()
im open for trades...maybe an old gixer 1100 or zx6r, cbr900, gs1150 etc...
Jesus that's sweet, I grew up riding Banshees and nothing smells better to me than the 927 pouring out in blue smoke! Why havn't I heard this thing around town? Great job!
Friend: man riding this really hurts my balls
Me: Well you're not supposed to sit on your balls!
What is involved in getting it to run oil injected so one wouldn't have to carry a ratio-rite on every ride?
Different Carbs, an oil reservoir,
Friend: man riding this really hurts my balls
Me: Well you're not supposed to sit on your balls!