WTB slip on for 02 ZX6R

[tbonehedge]

The Muzzy slip on that is on there now is shot, all the rivets holding the thing together are loose and the pipe barely stays on the bike. Anyone have a slip on for sale that would work with my existing piping?

[GNTurbo6]

Try replacing the rivets?

[OreoGaborio]

You can usually rebuild those things for cheap pretty easily w/ the right tools.

[tbonehedge]

How can I replace the rivets? I'm not sure how to do that, what tools do I need? Think a bike shop would do if I feel lazy and not try it myself?

[DuncanMoto]

How can I replace the rivets? I'm not sure how to do that, what tools do I need? Think a bike shop would do if I feel lazy and not try it myself?

Rivet gun tool.

[Kitt]

where is victory mills? I've done this a few times... and have the tool/hardware handy

[tbonehedge]

where is victory mills? I've done this a few times... and have the tool/hardware handy

New York, about 10 miles East of Saratoga...... not too close to Springfield.

[loridin64]

I have a Scorpion Titanium Flame can.

Looks like this: http://i83.photobucket.com/albums/j3...MVC-002F-4.jpg

(not my bike, just found on google)

i'll let it go on the cheap

[tbonehedge]

Define cheap? Do you have any pics of the actual pipe, I want to make sure it'll work. It needs to slip over the existing mid pipe and gets tightened down with a clamp around the mid-pipe, a clamp to the passenger peg, and a spring holding the can to the mid-pipe.

[loridin64]

make me an offer

its dirty in the pic, but the only blemish is the scratch at the end near the outlet.

the only thing is, i dont think it requires a spring. you or I can always get a loop tacked on there if you really want the spring, but i never used one.

i'll give you the clamp that goes to the peg too

[tbonehedge]

I'm going to try and replace the rivets myself, thanks anyway!