0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
i like these kinds of threads. do we have one in the dirty forum? quick snips of stuff you're working or worked on.
someone kick it off ... go .
Beta 200RR
In the last week I've given it an ultrasonic carb clean, valve clearance check, new plug, brush guards, and bar muffs.
99 + 02 SV650 ex-race - 91 FJ1200 street - 03 KDX220R woods - 12 WR450F motard/ice
that's what my "street legal 2-strokes" thread turned into...as long as you don't mind that I might likely run the thread with a buncha my broken projects, lol
yesterday: stoked that I got my XR650L figured out - the mixture screw fell out, that's why it was running lean:
the screw won't come in until Friday, so I rolled up an ear plug to test it out, and voila! she idles without choke again!
cleaned the tank by hand before it went on...
IMHO - aftermarket stickers randomly slapped on make it look a little trashy...
so I peeled them off...luckily the glue wasn't hardened and they came off easily
rear rim had a layer of grime...
I don't know the "proper" technique to remove it, I just use a household sponge with scour pad and scrub it with car was soap
like new again!
posted for sale
@ typeone - you mean this sort of stuff?
you want to post a max pic/post limit or anything?
FREE $10 UBER CREDIT W' PROMO CODE --> PON41
1994 Yamaha YZ250 CA Street Legal 2-smoke :smoke:
if you already have a 'build thread' keep it there![]()
Beta 200RR
understood
FREE $10 UBER CREDIT W' PROMO CODE --> PON41
1994 Yamaha YZ250 CA Street Legal 2-smoke :smoke:
we have a thread like this on a socal forum...but the title is amended to "What did you do today? Pics or it didn't happen!"
FREE $10 UBER CREDIT W' PROMO CODE --> PON41
1994 Yamaha YZ250 CA Street Legal 2-smoke :smoke:
I started it. Sat on it. Stared at it longingly. ... Then went inside and worked on the house.
Dropped my boingers off on Sunday. Patiently waiting for the call with the bill. Eeeeek!
Cliff's Cycles KTM
NETRA enduro B-vet
Close your eyes, look deep in your soul, step outside yourself and let your mind go.
I don't have a bike anymore, but seeing this is the dirty section... Stopped by the dealer on the way home from work to order some hot grips for the 450R, and just put my hippo ears on...bring on the ice!!
Yamaha
Cutting the **** oughta my hands...ahem...I mean, "putting my brand new friction spike tires on it in about ten minutes!"
Installed an hour meter on the CR250
Mike K. - www.goMTAG.com - For Pirelli tires, Moto-D tire warmers, and Woodcraft parts
LRRS/CCS Expert #86 / RSP Racing / Woodcraft / MTAG Pirelli / Dyno Solutions / Tony's Track Days / Sport Bike Track Gear / 434racer / Brunetto T-Shirts / Knox / Crossfit Wallingford
R.I.P. - Reed - 3-23-2008
Spikes on, no blood, and replaced front and rear wheel bearings while the wheels were off. Just ripped it around the backyard ice in the dark
Swapped wheels over to spikes, Popped in new pads front and rear, put on elephant ears and went for a rip!
On the Yamaha YZF 250 added a toolbag and kickstand and safari tank and rejetted. On the KTM 200 xcw added a toolbag.
Had a slowish (5psi every 20 min) leak in the rear tire. Took out the tube, couldn't find the leak anywhere. Put in a new tube anyway. Pita with ice tires. I definitely don't have it down to a science yet.
LRRS EX #7
Low Down Racing
- Woodcraft - Armour Bodies - Computrack Boston - Lifeproof -
Sadly all I've done is install the pigtail for a battery tender....
Dressed her up to go ice riding
Looked at the hour meter while planning the for sale ad that I've been meaning to post for a little while now. Next step is take some pictures.
-Brian
15 S-Works Venge
started my silencer snip project. shortening it by 3" to tuck it in some.
Beta 200RR
Installed the ice tires on the CRF250L, ready to hit the ponds!
Roland Arsenault
LRRS and USCRA #763
2012, 2013 and 2015 Big Fish Small Pond Champion
"The 4 board is an upshift marker, not a brake marker"