Welcome to NESR! Most features of this site require registration, including replying to threads, sending private messages, starting new threads, and uploading files. Click here to register.

Results 1 to 10 of 10

Cornerspeed's Bike Prep Rules...

  1. #1
    Littering and........
    Join Date
    Jul 2004
    Location
    Vermont
    Posts
    7,188

    Cornerspeed's Bike Prep Rules...

    Can anyone hook me up with a link for Cornerspeed's bike prep rules? I was surprised and had to do some impromptu safety wiring last time I went down there, I dont want to be surprised again.

    Thanks.

    0 Not allowed! Not allowed!

  2. #2
    Lifer s a x m a n's Avatar
    Join Date
    Mar 2003
    Location
    Lee, MA
    Age
    41
    Posts
    1,717

    Cornerspeed's Bike Prep Rules...

    Welcome to Cornerspeed

    Bike Preparation Requirements:

    1. Bikes must have oil fill cap, oil drain plug and oil filter safety-wired.
    2. Liquid cooled bikes must run water only or racing approved coolant only, no anti-freeze.
    3. Remove mirrors, tape over all glass and lights. AND Tape over the speedometer. You do not need the speedometer on the racetrack. It is an unsafe distraction.
    4. Tires must be Sport or Race compound with good tread depth. New tires are recommended.
    5. Side stand and/or Center stand must be secured in the up position using safety wire or zip ties. We prefer that you remove it but it is not required. You are required to have the stands secured in the up position before going onto the racetrack.

    0 Not allowed! Not allowed!

  3. #3
    Littering and........
    Join Date
    Jul 2004
    Location
    Vermont
    Posts
    7,188

    Cornerspeed's Bike Prep Rules...

    Thanks!!

    That makes me worry about my tires a little....

    0 Not allowed! Not allowed!

  4. #4
    lost in space zombie's Avatar
    Join Date
    Aug 2001
    Posts
    1,381

    Cornerspeed's Bike Prep Rules...

    Quote Originally Posted by highsider View Post

    That makes me worry about my tires a little....

    why worry your fucking bike only goes about 40mph anyways

    0 Not allowed! Not allowed!
    eat me

  5. #5
    Littering and........
    Join Date
    Jul 2004
    Location
    Vermont
    Posts
    7,188

    Cornerspeed's Bike Prep Rules...

    Quote Originally Posted by zombie View Post
    why worry your fucking bike only goes about 40mph anyways
    You zip it, I tried to buy a faster bike and you sold it on me. Dick.

    0 Not allowed! Not allowed!

  6. #6
    Lifer a13x's Avatar
    Join Date
    May 2005
    Location
    Warner Springs, CA
    Posts
    6,583

    Cornerspeed's Bike Prep Rules...

    Quote Originally Posted by zombie View Post
    why worry your fucking bike only goes about 40mph anyways

    Hey I'll be on a slotard too

    0 Not allowed! Not allowed!
    Boston --> San Diego

  7. #7
    Littering and........
    Join Date
    Jul 2004
    Location
    Vermont
    Posts
    7,188

    Cornerspeed's Bike Prep Rules...

    Quote Originally Posted by a13x View Post
    Hey I'll be on a slotard too

    No, your bike makes mine look like a Vespa. The DRZ is not very fast at all.

    0 Not allowed! Not allowed!

  8. #8
    Twin Addict Half Squid's Avatar
    Join Date
    Aug 2001
    Location
    Pepperell, MA
    Age
    49
    Posts
    9,052

    Cornerspeed's Bike Prep Rules...

    Almost done with the RC. If only I could find safety wire............... Argggggggg..

    I am trying to get it done so the bike is 100% ready to roll come arrival. New CT2's arrived today!
    Coolant was drained and replaced with water. Oil is changed. Track plastic is ready to mount, Front cowl is taped, headlights removed and mounted up on bike.
    Even took the bike around the block to check the forks and brakes to see if I installed everything right. Feels good so far. Brakes work great!!! Bike sounds sweet, cant wait to tear up VIR!!!

    0 Not allowed! Not allowed!
    Rides: 13 Hyperstada, 09 SFV650, 97 CBR 900RR
    www.tailofthedragon.com
    RIP A.B. RIP BEET, I Ride in Leathers because I would rather sweat than Bleed...

  9. #9
    Littering and........
    Join Date
    Jul 2004
    Location
    Vermont
    Posts
    7,188

    Cornerspeed's Bike Prep Rules...

    I'll have a roll of safety wire with me, if you need some Mike.

    I just finished the majority of the DRZ prep. Got the stupid chain figured out, drilled everything for the safety wire, and changed the oil. I'm not going to do the coolant until I get down there, my bike doesn't hold that much, it has no fairings, and its looking like a cold ride down there.

    New brakes, exhaust, chain , and a very inexpensive airbox mod should have the DRZ....errr...putting slowly around the track.

    0 Not allowed! Not allowed!

  10. #10
    Super Moderator OreoGaborio's Avatar
    Join Date
    May 2004
    Location
    MA
    Age
    44
    Posts
    38,868

    Cornerspeed's Bike Prep Rules...

    I got as much done as I could on Saturday w/ Clayton. Changed Oil, oil filter, full front brake caliper & fluid cleaning (minus pads), fork oil & radiator flush.

    Still gotta button everything back up... zip tie a few things, throw the body work back on, safety wire a few bits & find my brake lever & pivot pin.

    0 Not allowed! Not allowed!
    -Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
    GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media

    The Garage: '03 Tuono | '06 SV650

Similar Threads

  1. Bike Prep
    By tsanterre in forum Pit Area
    Replies: 14
    Last Post: 03-23-11, 03:54 PM
  2. Bike prep questions - specifics
    By Mad Max in forum Pit Area
    Replies: 4
    Last Post: 05-13-10, 08:49 AM
  3. Example pics for bike prep
    By Kurlon in forum Pit Area
    Replies: 13
    Last Post: 09-22-07, 06:39 PM
  4. race bike prep...
    By oreo_n2 in forum Pit Area
    Replies: 22
    Last Post: 04-23-07, 04:25 PM
  5. race bike prep/ day 1
    By GMS1000 in forum Pit Area
    Replies: 9
    Last Post: 01-31-03, 09:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •