Bike Preparation
1) All bikes MUST pass technical inspection prior to admittance to the track. If your bike DOES NOT pass tech inspection, you will NOT receive a refund.
2) Tires and brakes must be in good condition. Tires should be at least 75% of new condition. Any tires that are bluing from excessive wear will be disallowed. Slicks are allowed in 85% plus condition. We will have on site tire service at each track day, so if your tires don't pass, you will have the opportunity to put on replacement tires to pass tech.
3) All glass, headlight, turn signals, and plastic lenses must be taped over or removed. Side mirrors must be removed for the advanced group and at least taped over for all other groups.
4) We recommend, but do not require removal of center stands. No bikes with center stands will be allowed in the Advanced/Racer Group due to the ground clearance issue.
5) All machines must have an operational handlebar mounted kill switch/button and self-closing throttle in good working condition.
6) Advanced and Intermediate group riders MUST use water or water wetter or a non-ethyl glycol based anti-freeze/coolant. Approved Poly Glycol brands are: Evans, 7th Gear, Liquid Performance, and Engine Ice. NO AUTOMOTIVE ETHYL GLYCOL BASED COOLANTS ARE ALLOWED.
7) All valve stems must have caps.
8) Wheel balance weights must be well-secured.
9) License plates must have bolts taped or be removed.
10) Added for 2009 season: Advanced riders are required to safety wire drain plugs and oil fil caps if possible. Minimum requirement is RTV silicone on both. We highly suggest securing the oil filter as well. NOTE: If you spill oil on the track your day is over.