0
Help! I've been trying to get my bike up and running and I've been having some starting issues. I changed the wiring harness to a brand new OEM wiring harness. Started fine. Started installing lights and somewhere between messing with that the bike decided it didn't want to start anymore. Everything acts normal except the fuel pump is not priming when the key is turned/ kill switch is flipped.... When I bypass power from the battery to the pump it runs continuously. The relays are brand new (even tried the old ones)... The engine stop relay clicks and works properly (as far as I know). The brown wire at the fuel cut relay supplies no charge but when supplied a positive charge from the battery it runs the fuel pump continuously. Brown wire goes to fuel pump. It odd that all other wires at this relay have a negative charge? I tried replacing the ecm with a used one to no prevail. Any suggestions to try next?