07-08 ZX-6R Fender Elim

[hurstshifter]

Hey Guys,

I'm looking for a fender eliminator for my 08 zx-6r (damn that thing is ugly). This one has been suggested to me ...

http://secure.compwerkes.com/Detail.bok?no=217

...but I wanted to check with any other 07-08 riders to see if this would be a good choice or if there might be a better one out there. This one is definitely a bit pricey but I don't mind paying more for the best one I can get. Another one of my concerns is taillight visibility. Want to make sure the cages can see which way I'm heading

[Fitz]

Looks almost identical to mine save for the turn signals. I picked up an LED taillight that has the ability to blink either on the left or right side and wired that in. The stock bracket can be cut down to be very minimalist. Only associated cost is the tailight.

Fitz

[klp]

I have got an 07 and I just made one out of angle aluminum. Removed all the stock bs and cut the angle a bit shorter than the plate. It mounts to the stock bolts and the stock signals and taillight off of it too.

From the back you can see just the plate, it looks far better than stock.

[Stegosaurous]

Way to expensive for what it is. I used a piece of shower rail aluminum and drilled out two holes for it to bolt up to the stock spot, saw off the long tail and your good.

OR look at the Pinebox F/E kit. They are so so sexy