Welcome to NESR! Most features of this site require registration, including replying to threads, sending private messages, starting new threads, and uploading files. Click here to register.

Page 1 of 3 123 LastLast
Results 1 to 25 of 73

my 10r dyno

  1. #1
    I Dance With Will
    Join Date
    Oct 2002
    Location
    unknown
    Posts
    8,713

    my 10r dyno

    look at this bullshit. unbelievable.

    ran this last night at bike night. they use what Rye? Eddy Current 250?

    max power = 146.3
    max torque = 50.1

    i dont believe the torque is 50. i mean a 600 bike makes what? about 46 torque? this is bullshit?

    0 Not allowed! Not allowed!
    Last edited by Kham; 07-07-04 at 06:15 AM.
    "fuckit!"

  2. #2
    ChickenLover 02SuperHawkRdr's Avatar
    Join Date
    Jun 2003
    Location
    Ware, MA
    Age
    48
    Posts
    307

    my 10r dyno

    Your bike makes closer to 80 ft-lbs to the rear wheel. I don't know what's up with that dyno sheet.

    You can see that the torque plots starts off what would be correctly...and then something weird happens...

    0 Not allowed! Not allowed!
    Jason LaCroix
    '02 Honda VTR1000F
    IBA #19722

  3. #3
    I Dance With Will
    Join Date
    Oct 2002
    Location
    unknown
    Posts
    8,713

    my 10r dyno

    he said it's comparable. ??? to what?

    this other 10r dyno chart of torque is more like it. at least close to 70.

    http://zx-10r.net/forum/viewtopic.ph...highlight=dyno

    either my bike is fucked up or the dyno is bullshit.

    0 Not allowed! Not allowed!
    "fuckit!"

  4. #4
    Super Moderator OreoGaborio's Avatar
    Join Date
    May 2004
    Location
    MA
    Age
    44
    Posts
    38,866

    my 10r dyno

    that shit aint right... demand a refund

    0 Not allowed! Not allowed!
    -Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
    GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media

    The Garage: '03 Tuono | '06 SV650

  5. #5
    Work U HBerry's Avatar
    Join Date
    Jun 2004
    Location
    Nashua
    Age
    38
    Posts
    2,624

    my 10r dyno

    The torque thing was fucked up there, but the HP is right, his bike is as rye said very new and the weather was a little shitty. They also did a rolling start form 4k in 4th gear rather than ripping through the gears and it isnt corrected at all.

    0 Not allowed! Not allowed!
    --HBerry

    LRRS# 285 - Retired
    04 ZX-6R
    88 EX500 - Broke

  6. #6
    Senior Member slingblade's Avatar
    Join Date
    Apr 2003
    Location
    central, ma
    Posts
    362

    my 10r dyno

    Why do they use mph too... RPM is so much better to read off of. Sure you can do the math, but c'mon.

    The Tq is definatly off. The curves should cross at 5252RPM. Again; you can prolly do the math yourself based on HP numbers and speed.

    0 Not allowed! Not allowed!

  7. #7
    Angry Gumball RandyO's Avatar
    Join Date
    Jul 2001
    Location
    Farmington, NH
    Age
    71
    Posts
    18,024

    my 10r dyno

    I don't get it, it looks like a hokey chart, when you have a dyno run done aren't they usually based on engine rpm, this one looks like it is based on mph . if that's what you get for a slip of paper after you beat the shit out of your bike, I wouldn't put my bike thru it for free, and people pay for this service?

    0 Not allowed! Not allowed!
    RandyO
    IBA#9560
    A man with a gun is a citizen
    A man without a gun is a subject LETS GO BRANDON

  8. #8
    Kosher Assassin Stoneman's Avatar
    Join Date
    May 2001
    Location
    Center Barnstead, NH
    Posts
    1,128,331

    my 10r dyno

    Uh-oh, Kham! Gotta find another compensation tool!

    0 Not allowed! Not allowed!
    Did you grit your teeth and try to look like Clint Fuckin' Eastwood?
    Or did you lisp it all hangfisted like a fuckin' flower?

  9. #9
    NOT laughing with you {~; bemused's Avatar
    Join Date
    Jun 2002
    Location
    Deer Island, OR
    Age
    64
    Posts
    3,375

    my 10r dyno

    Originally posted by Stoneman
    Uh-oh, Kham! Gotta find another compensation tool!


    now... that just wasn't very nice at ALL!

    0 Not allowed! Not allowed!
    WWSD? (what would Sneakers do?)
    "for every credibility gap, there is a gullibility fill"
    jeff f
    '97 RF900R

  10. #10
    Super Moderator beet's Avatar
    Join Date
    May 2002
    Location
    Meriden CT
    Posts
    11,349

    kham your nuts that bikes bad ass .

    i would never put my bike on 1 its a tuning machine your bikes tuned you git
    "ps My Dick is Still bigger then yours "

    0 Not allowed! Not allowed!
    www.bostonmoto.com

    Forum Rules
    Heres a condom. I figured since youre acting like a dick, you should dress like one too.

  11. #11
    I Dance With Will
    Join Date
    Oct 2002
    Location
    unknown
    Posts
    8,713

    my 10r dyno

    i was curious about the soft vs hard breakin bullshit and want to see the actually numbers for myself but looks even more bullshit as far as torque. well i dont think i'd do it again unless i got power command in it.

    0 Not allowed! Not allowed!
    "fuckit!"

  12. #12
    Work U HBerry's Avatar
    Join Date
    Jun 2004
    Location
    Nashua
    Age
    38
    Posts
    2,624

    my 10r dyno

    Kham, is it really worth $300 for 10 extra horse power?

    0 Not allowed! Not allowed!
    --HBerry

    LRRS# 285 - Retired
    04 ZX-6R
    88 EX500 - Broke

  13. #13
    Super Moderator beet's Avatar
    Join Date
    May 2002
    Location
    Meriden CT
    Posts
    11,349

    that bikes sick now dynos r

    Originally posted by Kham
    i was curious about the soft vs hard breakin bullshit and want to see the actually numbers for myself but looks even more bullshit as far as torque. well i dont think i'd do it again unless i got power command in it.

    its the operator

    0 Not allowed! Not allowed!
    www.bostonmoto.com

    Forum Rules
    Heres a condom. I figured since youre acting like a dick, you should dress like one too.

  14. #14
    I Dance With Will
    Join Date
    Oct 2002
    Location
    unknown
    Posts
    8,713

    my 10r dyno

    Originally posted by HBerry
    Kham, is it really worth $300 for 10 extra horse power?
    not just to get 10 extra hp but for even more smoothness? just saying i dont wanna do another dyno unless i did some changes.

    0 Not allowed! Not allowed!
    "fuckit!"

  15. #15
    Lifer legalspeed's Avatar
    Join Date
    Jun 2002
    Location
    Somersworth, NH
    Age
    61
    Posts
    4,594

    Re: that bikes sick now dynos r

    Originally posted by beet

    its the operator
    some guys take years to fine tune their skills on a dyno. Dynomometer offers a school.

    I think it was not corrected. Don't worry 'till you have three or four sheets from different peeps.

    0 Not allowed! Not allowed!
    LRRS\CCS\WERA #486

  16. #16
    Work U HBerry's Avatar
    Join Date
    Jun 2004
    Location
    Nashua
    Age
    38
    Posts
    2,624

    my 10r dyno

    Kham wasnt the one on the dyno, it was one of the guys from RJ's, and they have been doing it for years. The dyno wasnt corrected for anything so thats why it shows lower numbers. RJ also said if they ripped through every gear from 2nd gear up it would show better numbers.

    0 Not allowed! Not allowed!
    --HBerry

    LRRS# 285 - Retired
    04 ZX-6R
    88 EX500 - Broke

  17. #17
    NOT laughing with you {~; bemused's Avatar
    Join Date
    Jun 2002
    Location
    Deer Island, OR
    Age
    64
    Posts
    3,375

    my 10r dyno

    naw... face the truth, Kham: you're bike is a total, complete piece of junk. I was gonna mention that on our ride last Saturday, but it slipped my mind...

    the dyno proves it!

    ya might as well just chuck it out, and start over again...

    oh... I know it will be hard for you to do that, so I will selflessly volunteer to take it from you and see to it that it's disposed of properly...

    0 Not allowed! Not allowed!
    WWSD? (what would Sneakers do?)
    "for every credibility gap, there is a gullibility fill"
    jeff f
    '97 RF900R

  18. #18
    IWOK Prez. bigred875's Avatar
    Join Date
    Sep 2003
    Location
    Manvile, RI
    Posts
    8,083

    my 10r dyno

    It's 24.8 more then my bike..

    0 Not allowed! Not allowed!
    Quote Originally Posted by ThisBitch View Post
    From my experience, its the natural red heads (aka gingers) that have no soul--- I mean are crazy.

  19. #19
    Super Moderator beet's Avatar
    Join Date
    May 2002
    Location
    Meriden CT
    Posts
    11,349

    Re: Re: that bikes sick now dynos r

    Originally posted by legalspeed
    some guys take years to fine tune their skills on a dyno. Dynomometer offers a school.

    I think it was not corrected. Don't worry 'till you have three or four sheets from different peeps.

    i once asked a buddy dan if he dynoed his gsxr1k
    & he laughed & asked why its sick i need no slip 2 prove it
    #s can b fugged 1 way or the other

    im not picking on dynos they r tools that have a place

    0 Not allowed! Not allowed!
    www.bostonmoto.com

    Forum Rules
    Heres a condom. I figured since youre acting like a dick, you should dress like one too.

  20. #20
    IWOK Prez. bigred875's Avatar
    Join Date
    Sep 2003
    Location
    Manvile, RI
    Posts
    8,083

    my 10r dyno


    0 Not allowed! Not allowed!
    Quote Originally Posted by ThisBitch View Post
    From my experience, its the natural red heads (aka gingers) that have no soul--- I mean are crazy.

  21. #21
    IWOK Prez. bigred875's Avatar
    Join Date
    Sep 2003
    Location
    Manvile, RI
    Posts
    8,083

    Re: Re: Re: that bikes sick now dynos r

    Originally posted by beet

    i once asked a buddy dan if he dynoed his gsxr1k
    & he laughed & asked why its sick i need no slip 2 prove it
    #s can b fugged 1 way or the other

    im not picking on dynos they r tools that have a place
    yup and every dyno is gonna be different.. Kham I wouldn't worry about this at all... just go to another dyno run and I suspect you might do better....if not there is always NOS

    0 Not allowed! Not allowed!
    Quote Originally Posted by ThisBitch View Post
    From my experience, its the natural red heads (aka gingers) that have no soul--- I mean are crazy.

  22. #22
    Just Registered TLRMan's Avatar
    Join Date
    Jun 2001
    Location
    Northshore/Beverly, MA
    Age
    65
    Posts
    2,005

    my 10r dyno

    Originally posted by HBerry
    Kham, is it really worth $300 for 10 extra horse power?
    10 extra HP for 300 bucks...Thats a friggen deal!
    There is more to the PC than just getting max HP. If the guy on the dyno knows his shit, and uses the PC tuning link software, it can't get any better than that.

    0 Not allowed! Not allowed!

  23. #23
    I Dance With Will
    Join Date
    Oct 2002
    Location
    unknown
    Posts
    8,713

    my 10r dyno

    but you all have seen a stock 600 can put out about what? 46 ft-lbs? i mean how can other stock setup can put out about 70 ft-lbs and mine is 20 less? the HP is about right but fuck. do you think the guy whos been doing dyno for so many yrs will admit he missed something?

    i want my refund and will need a new bike like you said.

    0 Not allowed! Not allowed!
    "fuckit!"

  24. #24
    Member coffee's Avatar
    Join Date
    Jan 2004
    Location
    NW Vermont
    Age
    53
    Posts
    69

    my 10r dyno

    That thing is really fucked up. The Torque curve should be continuous (no breaks). If I'm reading this right, every time there is a break it is saying your bike was putting out zero torque...so from 42-60mph, and 82-112 mph your bike produces no torque...that is not possible. How did it get from 42 to 60 mph if no torque was being produced? It also should not instantaneously jump...think you got hosed.

    0 Not allowed! Not allowed!
    Io amo la mia Ninja.
    Fai una cavalcata con me.

  25. #25
    Lifer
    Join Date
    Oct 2001
    Location
    Bedford, MA
    Posts
    5,237

    my 10r dyno

    Originally posted by TLRMan
    10 extra HP for 300 bucks...Thats a friggen deal!
    There is more to the PC than just getting max HP. If the guy on the dyno knows his shit, and uses the PC tuning link software, it can't get any better than that.
    Don't listen to him! He'll build your 10R up to 225hp at the wheel and you'll have no money left.

    0 Not allowed! Not allowed!

Page 1 of 3 123 LastLast

Similar Threads

  1. Dyno ????
    By Donjuan in forum Pit Area
    Replies: 5
    Last Post: 01-14-11, 10:20 PM
  2. Rob's dyno svc?
    By 13 in forum Pit Area
    Replies: 5
    Last Post: 05-08-06, 11:54 PM
  3. Dyno Run
    By ifishcat in forum Bike Maintenance
    Replies: 14
    Last Post: 05-20-05, 08:01 PM
  4. When is the next dyno day?
    By JJ in forum Rides & Events
    Replies: 0
    Last Post: 09-12-04, 02:21 PM
  5. Dyno Day
    By Rye in forum Rides & Events
    Replies: 51
    Last Post: 08-06-04, 09:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •