2006 GSXR 1000 CS sprocket??'ss

[duganc1717]

Does anyone know the size of the retaining nut on the CS sprocket of a 06' GSXR 1000?

[SVRACER01]

Wirelessly posted (HTC EVO "DROID" : Mozilla/5.0 (Linux; U; Android 2.2; en-us; Sprint APA9292KT Build/FRF91) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1)

No.
Next question

[Pigman]

Yea....I want to say we use a 32mm and use an Impact gun..Don't put in gear and don't put a piece of wood in there and think it’s going to come off with a wrench...cause it aint Happen... Gotta shock it with the impact gun to get it off

Rear axle nut is 36 I believe

[Slyder]

Pigman FTW...again!

32mm.

Although I've used the piece of wood through the rear wheel against the swing-arm with the bike in gear method. It can be a bear sometimes and other times it breaks apart without a problem. I'd definitely go the impact route if I had one available to me.

torque the CS nut to 83 foot pounds

[duganc1717]

Yea....I want to say we use a 32mm and use an Impact gun..Don't put in gear and don't put a piece of wood in there and think it’s going to come off with a wrench...cause it aint Happen... Gotta shock it with the impact gun to get it off

Rear axle nut is 36 I believe

Interesting, I've always been able to remove a CS sprocket retaining nut using a piece of wood and 1/2" drive breaker bar. Shit my 929rr I used a 1/4" rachet.....

Never needed an impact gun

[Ray-Ray]

Interesting, I've always been able to remove a CS sprocket retaining nut using a piece of wood and 1/2" drive breaker bar. Shit my 929rr I used a 1/4" rachet.....

Never needed an impact gun

you shut your mouth when your talking to him!!! still need that lever?

[Danz19899]

depends on the bike and who put the last sprocket on. Dealers tend to be hacks and just driver them on with the gun making them a B***H to get off but if they are put on properly and torqued to spec. They shouldn't take any more effort then a lug nut.

Impact is always a huge help when one is being troublesome

[duganc1717]

still need that lever?

Yes, I'll get a hold of you later in the week...

[Pigman]

I am the GSXR GOD>>>>>>>>>>>>>>>>>>>>>>>>>