0


been awhile since i posted any pics of my beast...here are some recent ones with a couple minor mods
03 black pearl Z1000
![]()
![]()
![]()
636 polished forks SS lines and brakes.
![]()
mods done:
Matris Stearing DAMPER(NOT dampener )
Corbin frt seat
Hindle 4-2-1 full Ti
Power Commander 3
636 rear shock
tail lifted 1 1/2"
zero gravity double bubble
+2 in the rear sprocket
rear veiw camera with 2 1/2" monitor with night vision
636 front master cylinder
extended kick stand to compensate the tail lift
clear alternative integrated tail light
short stalks in the frt
relocated plate to the batt. box with 4 LED's lighting the plate
wired for heated gear(have jacket and gloves...some of us ride year round )
LP carbon fiber frame sliders
Motosomthing-or-other case sliders
EBC Kevlar Streetracer clutch
636 forks
636 radial brakes
SS lines
EBD HH
"crispy's" bar end mirrors(not in pics)
Sylvania Silverstar H7's
gloss black powder coating done:
fuel filler ring
valve cover
frame sliders(the non-CF parts)
FI cover
frame cover
rear sets, pegs and passenger pegs
dogbones
cltch, frt brk, rr brk, shift levers
linkage
kickstand(before it was extended..needs to be redone)
couple mics bolts
maybe it should read...
2003 kawasaki 636
modded with z100 polished rims, Z1000 engine, and Z1000 body work
Original forks , brakes , master cylinder and rear schock
![]()
hmmmm......
Nice...I love those bikes, and yours is very badass looking. Even though they're completely different, that's the other bike I was considering before getting my VFR.
"It is important never to forget where u all came from — becoz black, white, brown or pakistani we all come from de same place — de punani."
-Ali G
Triumph Daytona 675 SE
![]()
![]()
But can it do wheelies?![]()
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
PS that new back lawn is looking great....![]()
hmmmm......
"go bang yourself"
![]()
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
very nice!whats up with all the mods? brakes, clutch, forks.. you just like to wrench on it or did you feel it was lacking in these areas? ether way nice work.
i'll give ya 5g's right now for it![]()
![]()
I know it's not a dampener... but are you sure it's Matrix and not Matris.Originally posted by bigred875
mods done:
Matrix Stearing DAMPER(NOT dampener )
2003 ZX7R
1995 916
Nice job on the mods... and the choice of damper.
From what I've heard about them they are top notch.
I really like the radial caliper mounts.
2003 ZX7R
1995 916
well i bought it new in 03 and have been gradully doing stuff. I have a bad problem of not wanting to have the same thing as someone else..so i tinker... But the suspension and brakes needed work.Originally posted by blackvfr
very nice!whats up with all the mods? brakes, clutch, forks.. you just like to wrench on it or did you feel it was lacking in these areas? ether way nice work.
i'll give ya 5g's right now for it![]()
![]()
The suspension is too soft(like jsut about all bike sold) and the forks are not that adjustable...there is one knob on one of the fork tubes and that is it.. I still need to upgrade the spring and valves...but that will probably happen next winter...
The brakes are a bad desgin..the line runs to the right caliper then jumps over to the left and i have since strechted teh lines enough so that the lever would hit the bar. I would bleed them and they would be "ok" then would suck after a couple minutes...i replaced the M/C first and it still sucked.
$5k with a down payment of $1k and maybe I'll think about it...even then i dunno..i got her set up just how i like her now..
thx..i got a screaming deal on that, the pipe and the windscreen..it looked cool and retailed for a ton of money so i couldnt pass it upOriginally posted by LuvDog
Nice job on the mods... and the choice of damper.
From what I've heard about them they are top notch.
I really like the radial caliper mounts.
Originally posted by bigred875
Matris Stearing DAMPER(NOT dampener )![]()
![]()
pet peeve is it?
Been stopped for that plate yet? Looks great. Did you get the mirrors yet and just not on or are they in the mail?
Bras cause cancer.
Squid!!!
Mods are a waste of money... Mines still stock... and i'll smoke ya around the track!!!!
j/k. be nice.
The SS brake lines and dog bones actually made a huge difference on my faster orange tank.
That thing looks good in stealth mode.
Brent LRRS #772
2006 KTM 560 SMR
well my offer stands till i find another bike. i would give you six for it if i could, its worth it. you've done all the mods i would have and much more.Originally posted by bigred875
well i bought it new in 03 and have been gradully doing stuff. I have a bad problem of not wanting to have the same thing as someone else..so i tinker... But the suspension and brakes needed work.
The suspension is too soft(like jsut about all bike sold) and the forks are not that adjustable...there is one knob on one of the fork tubes and that is it.. I still need to upgrade the spring and valves...but that will probably happen next winter...
The brakes are a bad desgin..the line runs to the right caliper then jumps over to the left and i have since strechted teh lines enough so that the lever would hit the bar. I would bleed them and they would be "ok" then would suck after a couple minutes...i replaced the M/C first and it still sucked.
$5k with a down payment of $1k and maybe I'll think about it...even then i dunno..i got her set up just how i like her now..
i found a black one in manchester for 5 but it was completly stock and a little ruff. i was hoping to fine one that had atleast after market slip on's.
hahaha...yeah little... and ya they are on just dont have a great pics...Originally posted by Nikon
![]()
![]()
pet peeve is it?
Been stopped for that plate yet? Looks great. Did you get the mirrors yet and just not on or are they in the mail?
but here is one just for youlol
![]()
oreo - BRING IT!![]()
![]()
blackvfr - you should not have a problem finding a nice one for $5k you could keep an eye out over here for one http://www.riderforums.com/
thanks for the website. found a few i like for sale on there. to bad there in ca or the f'n uk!![]()
i'm torn between waiting or just buying that zx-9 today![]()