0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
Is there anyplace local to Woburn, MA where I can source some of this stuff? I need to reroute my GSXR reservoir to work with the Woodcraft clip-ons. The OEM S tube is way too short.
Is this as easy as hitting Home depot's plumbing section for some clear tubing? That works fine on the brake bleeds I made, not so sure about the real world application though. I don't want to send $25 for 3" of the stuff through Yoyodyne, either.
Wirelessly posted (iPhone 4s)
Tygon. Forget what number. Do a forum search for Tygon though.
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
I always get it from Motomummy, three days and it's in your hands. Might as well order enough to do the rear reservoir delete while you're at it. Bonus points, they have the honda caps as well.
https://www.motomummy.com/store/prod...cat=252&page=1
Wirelessly posted
Tygon. You can buy it from mcmaster Carr and have it next day ups ground.
wouldnt a fuel line work from home depot or local autoparts store? it is pressure tested and wouldnt break down easily. thats if you need something right away, if you can wait i guess might as well order something more part specific as listed above
Wirelessly posted
You don't want condensation in there. Tygon is the stuff. I wouldn't use anything else in a brake system.
Thanks!
8mm tubing?
Last edited by NPDCPA; 06-05-12 at 06:43 AM.
Tygon-Kurveygirl-next day air!!
Just had an "Ahha" moment that might help out- go here- http://www.autozone.com/autozone/acc...entifier=46839
pull the hoses off and use them until you get the right stuff, then save the bleeder to bleed the brakes later!!
As Inspector Clouseau would say..."Case solvead"
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
Motomummy was the hook up. Methinks we need a local source for this stuff.
Nice, I just ordered some for myself from motomummy.
I got 2 feet from McMaster-Carr for 3.50 plus another 4.39 for shipping (7.89 shipped)
http://www.mcmaster.com/nav/enter.asp?partnum=5103K34
Tygon 2375 - Part number 5103K34 -Chemical-Resistant Clear Tygon Tubing 1/4" ID, 3/8" OD, 1/16" Wall Thk
Last edited by OreoGaborio; 06-06-12 at 07:45 PM.
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
I picked up 3 feet, mines bigger pete, and a magnetic oil drain plug for about 20 bucks shipped. They have free shipping on everything but require you to buy something else with the brake line, kinda dumb but thankfully I needed the oil plug anyways.
"You don’t need to tell me the horror story about your uncle’s buddy who wiped out his chopper while drag racing at some hooligan rally. That just makes me wish I were talking to your uncle’s buddy instead of you. He sounds pretty cool."
Originally Posted by JalopySiR
BWAHAHAHAHAHA!! This time I was laughing at you. Sorry.
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
It's just weeping cuz it's emo.
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
So I realized the other day that this stuff is clear. Isnt UV supposed to be bad for brake fluid? I thought that was why the OEM tubing is always black.
"You don’t need to tell me the horror story about your uncle’s buddy who wiped out his chopper while drag racing at some hooligan rally. That just makes me wish I were talking to your uncle’s buddy instead of you. He sounds pretty cool."
Originally Posted by JalopySiR
BWAHAHAHAHAHA!! This time I was laughing at you. Sorry.