Count Down Untill 2013 Season Kicks Off!

[CBR929RE]

bodywork is here but I have no bike to put it on now

[wiggeywackyo]

Only have to: finish bondo, spray bomb, fluids, install new m/c, rotors, pads, hand guards, retap some holes.................

In other words, I'm screwed.

[Rada]

Going to pick up the Towed Inn II tonight to get it ready for the season..

Looks like I'm going to be glad to have a heater..

[CBR929RE]

Only have to: finish bondo, spray bomb, fluids, install new m/c, rotors, pads, hand guards, retap some holes.................

In other words, I'm screwed.

on your way home from China stop in Japan and stuff a Yosh prepped bike in your suitcase. problem solved

[csmutty]

Going to pick up the Towed Inn II tonight to get it ready for the season..

Looks like I'm going to be glad to have a heater..

Last year my heat didn't work for the 1st event....ugh that sucked.

[CBR929RE]

scratched my front fender bringing it home from the painter. grrrrrr. wait this is a good thing isn't it, means I'm not gonna crash right? I was thinking of putting a red stripe of vinyl down the middle of the fender anyway.

[wiggeywackyo]

scratched my front fender bringing it home from the painter. grrrrrr. wait this is a good thing isn't it, means I'm not gonna crash right? I was thinking of putting a red stripe of vinyl down the middle of the fender anyway.

Kinda looks like a lighting bolt.

[CBR929RE]

Kinda looks like a lighting bolt.

I shoulda lined up the flash with the end of the scratch.

[tsorfas]

i can give you a nice sticker for it

[CBR929RE]

i can give you a nice sticker for it

I think I'll be ok with the scratch. I'm just gonna cry about it for the next week

[lrrs428]

14 days fellas'

[JettaJayGLS]

Sunday needs to be a big day for me...need to get the entire bottom end buttoned up. Cases are back together, but the left and side covers and all their components are not installed yet. Also need to get everything but the motor swapped over to the new frame.

I should at a minimum take a glance at my trailer as well. I'm hoping my dad tossed a cover over it before the snows but I don't think so (it wasn't his responsibility anyway). It will probably need some spray paint, maybe some touch up on the lights/wiring, and I really need to get a new spare after my blow out last year.

[Jim]

scratched my front fender bringing it home from the painter. grrrrrr. wait this is a good thing isn't it, means I'm not gonna crash right? I was thinking of putting a red stripe of vinyl down the middle of the fender anyway.

did you keep the Stupid Hurts bandaid in put on your tail?

[tsorfas]

Sunday needs to be a big day for me...need to get the entire bottom end buttoned up. Cases are back together, but the left and side covers and all their components are not installed yet. Also need to get everything but the motor swapped over to the new frame.

I should at a minimum take a glance at my trailer as well. I'm hoping my dad tossed a cover over it before the snows but I don't think so (it wasn't his responsibility anyway). It will probably need some spray paint, maybe some touch up on the lights/wiring, and I really need to get a new spare after my blow out last year.

Just reading I got stressed lol

[CBR929RE]

problem at the dyno. Bazzaz wasn't picking up the rpm signal and the quickshifter wasn't working. I hope its just something stupid I missed in the install. for some reason I think I might have actually not plugged the quickshifter in. pretty sure I got the rest of it right. Scottie knows his stuff so I'm sure he'll figure it out, hopefully its not the actual box.

did you keep the Stupid Hurts bandaid in put on your tail?

this is all brand new bodywork. feel free to slap one on anytime.

[CBR929RE]

problem at the dyno. Bazzaz wasn't picking up the rpm signal and the quickshifter wasn't working. I hope its just something stupid I missed in the install. for some reason I think I might have actually not plugged the quickshifter in. pretty sure I got the rest of it right. Scottie knows his stuff so I'm sure he'll figure it out, hopefully its not the actual box.


this is all brand new bodywork. feel free to slap one on anytime.

I plugged in a connector to the wrong sensor. easy fix.

[timmyho414]

I plugged in a connector to the wrong sensor. easy fix.

got to love simple fixes. even if they were self inflicted.

I just fired up my bike today, god I love that way it sounds!

[lrrs428]

Both my bikes are %100 as of right now. Next weekend is trailer packing time and I'm headed down Thursday afternoon.

- - - Updated - - -

13 days

[CBR929RE]

got to love simple fixes. even if they were self inflicted.

I just fired up my bike today, god I love that way it sounds!

even better when you aren't the one fixing it

[lrrs428]

12 Days now its really getting real hahahahaha........................hey Smutty...................

[wiggeywackyo]

Clahkie, you're stressing me out.

[lrrs428]

Don't neglet your trailers fellas', it would be a shame to have all this hard work prepping for LRRS and not make it there becasue of a trailer issue. Just saying

[csmutty]

12 Days now its really getting real hahahahaha........................hey Smutty...................

I think I know what you are referring to hahaha.

I finally got the spare motor in my bike.

[Jim]

Just picked up my bodywork from the painter

[lrrs428]

11 Days