0
Starting to get stirr crazy for sure, can't wait untill all my stuff comes back and can start the tear down and chassis prep
You need chassis parts? I have 2 frames and swingarms sitting in the basement taking up lots of space. If nobody wants them they are going to the scrapyard.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
I have a steel braided front brake and a 39 tooth rear sprocket for a crf 4 fiddy free
Kb
03.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
na wont do me any good thank though!
- - - Updated - - -
Jettajay though...................
Yep, I need to take a trip down there and just pick up all your shit you don't want. I have an inch long crack on my frame that needs to be re welded this season, a new frame may just be eaiser. It was already welded prior to me buying the bike, but apparently it couldnt withstand my multiple tumbles down the pavement.
And I just stepped on the scale this morning, 156. That's about 14 pounds less than last season. Hopefully I get a bit more use out of the motor from that.
Kate's did setup my front for 170...hopefully that still works. Still need to send him my rear and do everything else to my bike, I just haven't been home in forever, snow has called.
A man of many names...Jay, Gennaro, Gerry, etc.
Ok ill keep them around then.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
When I start my KTM in the morning, rules are broken. Its inevitable...
01 SV650S (RC51 eater)/07 690SM /03 300EXC/14 XTZ1200
TRACKS:Firebird/NHMS/VIR/Calabogie/California Speedway/NJMP/MMC/NYST/Palmer/Thompson/Club Motorsports
I have to hit the gym... I'm up to 145lbs and feeling slow.
Frame swap done on GSXR, started wrapping bodywork: about halfway done. Ordered some woodcraft goodies, some new wheels, my Motul order, new suit in the works, new gloves ordered. Gotta order maintenance items and get the ball rolling!
LRRS/CCS EX #29
434Racer Performance Parts / Motul / Sportbike Track Gear / Knox / Dyno Solutions / Tony's Track Days / MTAG Pirelli / Nexx Helmets / Woodcraft / GMD Computrack
87 days here at this rate..probably be in the South Africa. I guess that means more time for a Hawk motor swap.
Finally swapped subframes for a cut-up one for the R6 tail...still need some more fab work on that, but bought the supplies tonight. To do: wrap SV bodywork in vinyl, get numbers/plates, finish SV tail mounting, get Hawk running (?????), receive and mount Hawk tail, make Hawk bellypan and number plate, receive and mount Hawk transponder... I'm sure I'll have NO problem getting this all done...hahaI can't decide whether I'm pissed that you're trying to show me up in the No Shirt Club, or happy that 14 fewer pounds mean some of those musskuls are likely gone...
Bill Cool --- NEMRR EX #8 --- 2023 NEMRR GTO Champion, 2020-21 LRRS LWSS Champion --- RSP Racing / TTD / MTAG-Pirelli / Woodcraft / Sportbike Track Gear / Seacoast Sport Cycle
I have done nothing necessary besides buy a transponder and tire warmers. Bike needs to be taken apart, go through everything change fluids, safety wire everything, tired, maybe brakes, pick up fairings from Gino, paint them, mount them, my suit needs repairs n cleaning. Ya good fucking luck to me.
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
God's house? you're bringing it to church?
you should have seen me installing the aftermarket subframe and upper fairing stay/ram air tube. I had no clue what I was doing and I had a day and a half to do it before a race weekend. you have 2 months, plenty of time to stand there looking at it wondering what they hell you are doing.
of all the stuff I have to do this year the only thing I might have a little trouble with is mounting the new bodywork. can't be that difficult drilling the holes though
Last edited by CBR929RE; 02-19-13 at 11:37 PM.
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
65 Days
I need to go make sure my SV is still where I left it.
Mike K. - www.goMTAG.com - For Pirelli tires, Moto-D tire warmers, and Woodcraft parts
LRRS/CCS Expert #86 / RSP Racing / Woodcraft / MTAG Pirelli / Dyno Solutions / Tony's Track Days / Sport Bike Track Gear / 434racer / Brunetto T-Shirts / Knox / Crossfit Wallingford
R.I.P. - Reed - 3-23-2008
Spoke to Kates today, def excited about the changes we are making for this year! Should have everything back by the end of next week.