Anybody used Ricks???

[wastedincome420]

I was wondering if anyone here has delt with Ricjks motorsport electrics ...I need a new RR and since there in NH I was thinkin bout goin to em.....The part I dont like is that there RR DONT come with the OEM connectors and you have to use the one from your old one
ANy comments??

[Stoneman]

Originally posted by wastedincome420
ANy comments??

I'm gonna hafta direct any requests for comments to my lawyer at this time...

[wastedincome420]

Originally posted by Stoneman
I'm gonna hafta direct any requests for comments to my lawyer at this time...

AND what is the best way to contact HIM?? How bout a phone number

[Degsy]

Originally posted by wastedincome420
I was wondering if anyone here has delt with Ricjks motorsport electrics ...I need a new RR and since there in NH I was thinkin bout goin to em.....The part I dont like is that there RR DONT come with the OEM connectors and you have to use the one from your old one
ANy comments??

Should not be a problem. If you are not confident of getting the connection on correectly I am willing to help you out. I have an array of tools for removing connectors from wiring (I'm in that business) or I can cut the wires for you and do a very good solder/shrinktube job on it for you that you will never notice. I will be in NH at legalspeed's house on Friday evening.

Derek

[wastedincome420]

Originally posted by Degsy
Should not be a problem. If you are not confident of getting the connection on correectly I am willing to help you out. I have an array of tools for removing connectors from wiring (I'm in that business) or I can cut the wires for you and do a very good solder/shrinktube job on it for you that you will never notice. I will be in NH at legalspeed's house on Friday evening.

Derek

I doesnt bother me too much...Although I'd just rather see the proper connectors on there when paying $120
I havent done alot of soldering before (although I'm sure I could get it done)
If your willing to help. I would love to see a good job done w/ heatshrink,etc. Dans house is very close by and I know where it is. What time you gonna be round?? I thinkI'll run down to Hamstead, NH and get the new RR in the morning-aftnoon

[Honclfibr]

Originally posted by wastedincome420
I thinkI'll run down to Hamstead, NH and get the new RR in the morning-aftnoon

That's hampstead. With a P. Ain't no pigs round these parts.

Shop's on rt 121 on your right, about 1/8 mile after the intersection of 111, in that plaza right after the car dealership.

[legalspeed]

Originally posted by Honclfibr
That's hampstead. With a P. Ain't no pigs round these parts.

Shop's on rt 121 on your right, about 1/8 mile after the intersection of 111, in that plaza right after the car dealership.

That's in New Hampster, right?

[Degsy]

Originally posted by wastedincome420
I doesnt bother me too much...Although I'd just rather see the proper connectors on there when paying $120
I havent done alot of soldering before (although I'm sure I could get it done)
If your willing to help. I would love to see a good job done w/ heatshrink,etc. Dans house is very close by and I know where it is. What time you gonna be round?? I thinkI'll run down to Hamstead, NH and get the new RR in the morning-aftnoon

Should be there about 7pm

degsy

[Stoneman]

Originally posted by Degsy
Should be there about 7pm

degsy

Bwaaaaaaa haaaaaaa haaaaaaa!!!

TRANSLATION: I'll be there around 10:00, at the earliest...

[legalspeed]

[TIMMYDUCK]

I have used Rick's twice over the last couple of years, for some stators and rectifiers.
Replaced them on a freinds 85 Kawi, and a 81 Yamaha both electrical systems are still working fine 2 years later.

[wastedincome420]

Originally posted by TIMMYDUCK
I have used Rick's twice over the last couple of years, for some stators and rectifiers.
Replaced them on a freinds 85 Kawi, and a 81 Yamaha both electrical systems are still working fine 2 years later.

Thats whats I pretty much wanted to hear Thanks TIMMYDUCK

[wastedincome420]

Originally posted by Degsy
Should be there about 7pm

degsy

I'm gonna do my best and TRY to wait till then to have YOU wire er up. BUT I'm notthe greatest at waiting so I may just do er up myself......Even if I do myself I would like to swing over Dans to say Hi if thats ok

[wastedincome420]

Originally posted by Honclfibr
That's hampstead. With a P. Ain't no pigs round these parts.

Shop's on rt 121 on your right, about 1/8 mile after the intersection of 111, in that plaza right after the car dealership.

Ya Ya I forgot da P

Hopefully I should be able to find it ok, Thanks for the tip on location. When I called em yesterday she said that I MUST call first for directions, etc cause they dont normally do "walk in's"