0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
Mmm interesting ideas here. Well, first of all, no, I can't use the car right now because there's no good path for the car to get to the back of the house. I envision getting rid of a loot of the bushes/trees on one side and paving back into the yard and throwing a garage together one of these days.. but certainly not in the near future.
I think I'll try to measure the height/incline to see how steep it really is. But in all reality, I think it's just going to be inside the shed![]()
I just did this with my R5, I have about a 10" step over the top of the bulkhead. I bought a 2x12, screwed my wheel chock to the back for the rear tire, 2 2x4's on each side of the front to keep it from moving and a double 2x4 in front of the front wheel so I could pull on the forks. 2 of us pulled the whole thing up and out of the bulkhead, that things a hell of a lot heavier when it's at a 60 deg. angle. once it was far enough up, I was sitting on the front of the ramp, and unscrewed the front blocks and rolled it forward to teeter it over the top of the bulkhead. With anything newer/heavier I would try 3 people, but you run into a problem with space.
Its out!!
![]()