Hey Richie

[Jim]

Today....I can finally say I used all that power.

Maxed out 6th gear at 155 MPH (GPS detected) on the gixxah 600.

[Chippertheripper]

But...but...I thought it was 170?

[Jim]

That's all my bike's got with the terrible map, dragging pads, and +1 tooth in the rear sprocket.

[The Snowman]

That's all my bike's got with the terrible map, dragging pads, and +1 tooth in the rear sprocket.

And Jim at the throttle.

[Jim]

I'm pushing 104hp on this motor

[breakdirt916]

what was the indicated speed on the speeduhmeter?

[Manny]

Cool

[wiggeywackyo]

Should have bled the brakes.

[OreoGaborio]

Bleeding doesn't reduce dragging. It's the cleaning of the pistons.

[CBR929RE]

drill holes in the brake lever

[wiggeywackyo]

Bleeding doesn't reduce dragging. It's the cleaning of the pistons.

Just a subtle reference to Jimmy's past brake bleeding threads.

[Jim]

Bleeding doesn't reduce dragging. It's the cleaning of the pistons.

I clean my pistons every other race weekend. I've got a piston that needs to be replaced & new seals.

[Pittenger5]

Bout damn time Jimbo!
But really, 150? Youre gonna be down on power, might wanna get that checked out.

[CBR929RE]

he's only hitting 150 cause his gearing is way off

[GixerJockey]

I'm pushing 104hp on this motor

Whoh!!! Look out!

[Jim]

Whoh!!! Look out!

I know, it sucks. My good motor was getting 115 when it was last refreshed.

[Jim]

he's only hitting 150 cause his gearing is way off

Stock gearing today and I hit 151. My forks weren't set at the right level for the axle either. Just adjusted it and my front wheel still isn't spinning freely. So I'll need to rebuild my calipers this winter.

[GixerJockey]

I know, it sucks. My good motor was getting 115 when it was last refreshed.

CBR made 113... But I'm still in the mindset of big power... 1000 made 196 and the S4RS made 142 (and 80+ ft. lbs. of torque...WOOT!)

[CBR929RE]

Stock gearing today and I hit 151. My forks weren't set at the right level for the axle either. Just adjusted it and my front wheel still isn't spinning freely. So I'll need to rebuild my calipers this winter.

gsxrs suck

CBR made 113... But I'm still in the mindset of big power... 1000 made 196 and the S4RS made 142 (and 80+ ft. lbs. of torque...WOOT!)

that thing must be built

[GixerJockey]

gsxrs suck


that thing must be built

The 1000 is... to the hills...

The S4RS is stock except for a Termigoni full system and Ducati race ecu.

CBR is stock save for a Ti full system and a really good tune.

[CBR929RE]

The 1000 is... to the hills...

The S4RS is stock except for a Termigoni full system and Ducati race ecu.

CBR is stock save for a Ti full system and a really good tune.

I was just talking about the CBR. that's an optimistic dyno if that motor is stock

[GingahNinjah]

pffft topped out my 07 ZX6R at 165mph and that was before i did the jumper mod and put in a high flow air filter. no map bone stock Kawi wins

[tsorfas]

The 1000 is... to the hills...
.

IS???? as of right now? I was told you sold it!
If you still have it we need to absolutely test them out

[GixerJockey]

IS???? as of right now? I was told you sold it!
If you still have it we need to absolutely test them out

I did sell it... but still have access to it. (you didn't really think I'd dump an extra $20k into a bike and let it completely get away from me, did you?)

You probably don't want to tangle with that thing. It will make you want to light yours on fire...

- - - Updated - - -

I was just talking about the CBR. that's an optimistic dyno if that motor is stock

I'm pretty confident in the dyno. Wednesday bike?

There's always the possibility that there's some power helpers that I'm not aware of. I didn't build the bike.

[tsorfas]

I did sell it... but still have access to it. (you didn't really think I'd dump an extra $20k into a bike and let it completely get away from me, did you?)

You probably don't want to tangle with that thing. It will make you want to light yours on fire...

- - - Updated - - -



I'm pretty confident in the dyno. Wednesday bike?

I am not sure about that. and I would absolutely would love to test them out to see where we stand.