Welcome to NESR! Most features of this site require registration, including replying to threads, sending private messages, starting new threads, and uploading files. Click here to register.

Page 1 of 3 123 LastLast
Results 1 to 25 of 57

Got hit by a gate arm today

  1. #1
    With 2 esses's Rossco's Avatar
    Join Date
    Mar 2010
    Location
    Westford, MA
    Age
    35
    Posts
    1,941

    Angry Got hit by a gate arm today

    Well, today I got to test the durability of my helmet, which for a motorcyclist is never a good thing. Before any of you ask, no I did NOT crash.
    As I was leaving the parking lot at the college I go to I had to pass through a gate.
    Now these gates arrive from the manufactere with This on them.



    Of course, back in September, when these gates ere installed. I immediately e-mailed the parking services people and asked if this as for real. They assured me that it was just put their by the manufacturer as a liability type of thing and that I would be fine bringing my bike through those gates.
    The gate works using sensors placed in the ground that would detect a vehicle. When a vehicle is detected the gate arm is supposed to raise, and stay raised long enough for said vehicle to clear. It is supposed to stay up long enough.
    Yep, guess who got hit by the gate arm? Except for a sore neck, I'm fine, oh and I need a new helmet.

    Time to have a little word with the people at the parking services......

    0 Not allowed! Not allowed!
    Quote Originally Posted by DucDave View Post
    ...I have your pants!!!

  2. #2
    Super Moderator TheIglu's Avatar
    Join Date
    Apr 2003
    Location
    Royalston, MA
    Age
    43
    Posts
    21,761

    Re: Got hit by a gate arm today

    I'd say "here's your sign", but you obviously knew about it already

    0 Not allowed! Not allowed!
    2021 KTM Duke 890 R
    2016 BMW S1000XR
    1982 Honda CB750F Super Sport

  3. #3
    I pick things up.... mzdagrl's Avatar
    Join Date
    Jul 2005
    Location
    Bennington, NH
    Age
    41
    Posts
    4,754

    Re: Got hit by a gate arm today

    so, they put them on all the lots with motorcycle parking spaces? sounds like discrimination to me.

    0 Not allowed! Not allowed!
    Executive Distributor - ItWorks! Global
    All-Natural Health, Wellness and Beauty www.kchristian.myitworks.com Supplements, Skin Care, Energy Drinks, and MORE!
    If you run into a wall with a helmet on, you still ran into a wall.

  4. #4
    Senior Member Mike Qube's Avatar
    Join Date
    Sep 2009
    Location
    Medford, MA
    Posts
    523

    Re: Got hit by a gate arm today

    When I go into a lot with the gates, I just go around them.

    0 Not allowed! Not allowed!

  5. #5
    #331 CBR929RE's Avatar
    Join Date
    Apr 2009
    Location
    Bridgewater, MA
    Age
    43
    Posts
    5,623

    Re: Got hit by a gate arm today

    Salem State?

    0 Not allowed! Not allowed!

  6. #6
    Lifer
    Join Date
    Dec 2003
    Location
    Ma
    Posts
    10,687

    Re: Got hit by a gate arm today

    Should have got a few guys to lift it up.

    0 Not allowed! Not allowed!

  7. #7
    Lifer slammp's Avatar
    Join Date
    Jul 2008
    Location
    Massachusetts
    Posts
    1,361

    Re: Got hit by a gate arm today

    Fyi, the gates are activated by a wire, imbedded in the ground - called a "loop", which detects the metal in a vehicle. Most motorcycles do not contain enough metal close enough to the ground to trigger the loop. Thats why the stickers are on the gates as a warning. Same thing if you are towing a trailer - the gate will come down between the truck and the trailer thinking that the vehicle has passed because of the lack of metal at the hitch point.

    Professional parking advice - drive around the gate.

    0 Not allowed! Not allowed!
    Last edited by slammp; 11-03-10 at 04:38 PM. Reason: sp

  8. #8
    Posting Freak caddydaddy's Avatar
    Join Date
    May 2009
    Location
    Harlingen, Texas
    Posts
    825

    Re: Got hit by a gate arm today

    Quote Originally Posted by slammp View Post

    Professional parking advice - drive around the gate.
    Some lots that I have been on....there's not enough room to go around the gate!

    0 Not allowed! Not allowed!
    2017 Triumph Rocket III Roadster

    Cages: 2007 Jeep Grand Cherokee 4x4 Diesel, 2005 Escalade

  9. #9
    Don't bother me! R7's Avatar
    Join Date
    Jun 2001
    Location
    Yamaha Blvd
    Age
    51
    Posts
    14,566

    Re: Got hit by a gate arm today

    Quote Originally Posted by slammp View Post
    Fyi, the gates are activated by a wire, imbedded in the ground - called a "loop", which detects the metal in a vehicle. Most motorcycles do not contain enough metal close enough to the ground to trigger the loop. Thats why the stickers are on the gates as a warning. Same thing if you are towing a trailer - the gate will come down between the truck and the trailer thinking that the vehicle has passed because of the lack of metal at the hitch point.

    Professional parking advice - drive around the gate.
    In most cases you can see the sawcut where the line is to detect the metal. Similar to redlights, the axle of your bike will trigger it. In other words, if your at one of those gates..or at a redlight, put the axle over the saw cut line and it'll trigger the gate..or activate the redlight.

    0 Not allowed! Not allowed!
    Yamaha

  10. #10
    Lifer ThisBitch's Avatar
    Join Date
    May 2008
    Location
    Tucson, AZ
    Posts
    8,238

    Re: Got hit by a gate arm today

    Quote Originally Posted by caddydaddy View Post
    Some lots that I have been on....there's not enough room to go around the gate!
    YouTube - Limbo Rock Vedio

    0 Not allowed! Not allowed!
    Original

  11. #11
    Hawk Is Respectable Now WordTooYoMamma's Avatar
    Join Date
    Jan 2009
    Location
    Waltham
    Age
    35
    Posts
    2,376

    Re: Got hit by a gate arm today

    SUE

    0 Not allowed! Not allowed!

  12. #12
    Mophead going grey dontpanic's Avatar
    Join Date
    Aug 2008
    Location
    Massachusetts' Noth Shoah
    Age
    62
    Posts
    1,438

    Re: Got hit by a gate arm today

    Try putting the sidestand down at the sawcut.

    0 Not allowed! Not allowed!
    Go fast. Have fun. Repeat.

  13. #13
    #331 CBR929RE's Avatar
    Join Date
    Apr 2009
    Location
    Bridgewater, MA
    Age
    43
    Posts
    5,623

    Re: Got hit by a gate arm today

    I think you guys are missing something here. The gate obviously went up as it had to come down on his head. so he doesn't need tricks on how to get it to go up.

    0 Not allowed! Not allowed!

  14. #14
    Member
    Join Date
    Jan 2010
    Location
    Waterbury, CT
    Posts
    52

    Re: Got hit by a gate arm today

    This would happen to me at my school parking garage. The attendants told me it won't even open for a bike so I would walk/waddle with one foot on the high curb and roll pass the bar with the bike leaned all the way to the right just to make it through lol

    0 Not allowed! Not allowed!

  15. #15
    Super Moderator OreoGaborio's Avatar
    Join Date
    May 2004
    Location
    MA
    Age
    44
    Posts
    38,866

    Re: Got hit by a gate arm today

    Having worked closely with the parking garage folks in my building, I've gotten some insight as to how they and their equipment operates. They're probably gonna tell you to go screw... and rightly so. Plain & simple, the gates aren't designed with motorcycles in mind and there's signage posted there there plain as day.

    Will it work with a bike? Sure.
    Could it come down on you? Uhhhh yeah. Obviously, since it happened.

    My advice: Be quicker or duck next time.

    You're lucky you don't have hydraulic metal plate barriers that come up like a ramp as the arm comes down like we in my garage... I fucked up and started going just as it started to come up. No time or room to stop so I had to gun it, duck, and JUMP the fucking metal barrier as it came up. That was interesting.

    0 Not allowed! Not allowed!
    Last edited by OreoGaborio; 11-03-10 at 10:17 PM.
    -Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
    GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media

    The Garage: '03 Tuono | '06 SV650

  16. #16
    Member hskater26's Avatar
    Join Date
    Apr 2009
    Location
    Jonesborough, TN
    Age
    36
    Posts
    170

    Re: Got hit by a gate arm today

    i worked in the providence place mall for a short time but i never had any issues with the gate.

    0 Not allowed! Not allowed!
    95 Yamaha Seca II- Sold
    02 Ducati ST2

  17. #17
    Don't bother me! R7's Avatar
    Join Date
    Jun 2001
    Location
    Yamaha Blvd
    Age
    51
    Posts
    14,566

    Re: Got hit by a gate arm today

    Quote Originally Posted by CBR929RE View Post
    I think you guys are missing something here. The gate obviously went up as it had to come down on his head. so he doesn't need tricks on how to get it to go up.
    You're right..take the car, problem solved is the only real advice here

    Either the gate going down is on a timer, or something has to trigger it to go down...or it was broken.
    I'd rent a crane!

    0 Not allowed! Not allowed!
    Yamaha

  18. #18
    Super Moderator OreoGaborio's Avatar
    Join Date
    May 2004
    Location
    MA
    Age
    44
    Posts
    38,866

    Re: Got hit by a gate arm today

    Quote Originally Posted by R7 View Post
    You're right..take the car, problem solved is the only real advice here

    Either the gate going down is on a timer, or something has to trigger it to go down...or it was broken.
    I'd rent a crane!
    In most cases, the trigger is when it doesn't sense anything metal over the inductive loop.

    Every time I ride to work I go through 2 of these gates to get in and two to get out. I can take my sweet time passing in & out of these things, I just make damn sure I stay right over as much of the inductive loop as I can until I'm ready to pass through the gate.

    0 Not allowed! Not allowed!
    Last edited by OreoGaborio; 11-03-10 at 10:17 PM.
    -Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
    GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media

    The Garage: '03 Tuono | '06 SV650

  19. #19
    Just Registered Doc's Avatar
    Join Date
    Mar 2006
    Location
    Jericho, VT
    Posts
    19,396

    Re: Got hit by a gate arm today

    Quote Originally Posted by Awesome View Post
    Should have got a few guys to lift it up.
    Or a crane.


    OH OH!! Next time DUCK!

















    Doc Sucks

    0 Not allowed! Not allowed!
    "I'd rather ride a slow bike fast than a fast bike slow"
    Bikes: Ducati: 748 (Track) Honda: RC31 (Race/street)/ CRF 110 Mini Moto/ Hawk Endurance Racer Kawasaki: ZXR1200R
    BOMO Instructor
    EX# X

  20. #20
    Lifer slammp's Avatar
    Join Date
    Jul 2008
    Location
    Massachusetts
    Posts
    1,361

    Re: Got hit by a gate arm today

    I think you guys are missing something here. The gate obviously went up as it had to come down on his head. so he doesn't need tricks on how to get it to go up.
    No we got it. What you need to understand is that these loops can be very sensitive. There is a box inside of the gate housing called a loop detector. This can be set at different frequencies to increase/decrease the sensitivity of the loop. In many cases (garages particularly) they need to be de-sensitized in order to ensure that SUV's passing by on the floor below do not trigger the loop as this could cause the gate to come down on a car.

    Bottom line - your parking operator is not qualified to tell you it is ok to drive through the lane on a bike - there is a reason that the manufacturers put the warning stickers related to motorcycles on the gates - the settings are designed to detect a full size car (couple thousand pounds of metal about 12" above the floor). They are not tuned for a motorcycle and doing so would cause problems for cars (which unfortunately in garages and parking lots make up the majority of the traffic).

    My bike works on some garages and not others. I go to Lowell once a week and for the life of me I cannot get the gate to let me out of their garage no matter where I place the bike- I can enter every time with no problem. It really is a crap shoot with a bike.

    0 Not allowed! Not allowed!

  21. #21
    Life is good! gadget's Avatar
    Join Date
    Nov 2008
    Location
    Londonderry
    Age
    59
    Posts
    3,868

    Re: Got hit by a gate arm today

    http://www.wikihow.com/Trigger-Green-Traffic-Lights

    Basically, go get a Neodymium Magnet (rare earth) or buy one online for $20 and double stick tape it to the bottom of your bike.

    Make sure you clean the surface well with alcohol and use a good double stick tape. Metal parts are usually alloys so they are not very good for holding a magnet by itself also magnets are easily dislodged with sheering forces (pushing on it sideways).

    This will solve all of the issues people have mentioned here with not reliably triggering inductive sensor loops.

    0 Not allowed! Not allowed!
    Last edited by gadget; 11-04-10 at 09:09 AM.
    Sam


  22. #22
    Senior Member The Magician's Avatar
    Join Date
    Jun 2006
    Location
    Savannah, GA
    Age
    39
    Posts
    426

    Re: Got hit by a gate arm today

    just go faster.. were you going snails pace through there?

    0 Not allowed! Not allowed!
    The best advice I’ve ever been given is to not forget where you came from.

  23. #23
    Lifer RyanNicholson's Avatar
    Join Date
    Jun 2007
    Location
    Canterbury, NH
    Age
    38
    Posts
    3,460

    Re: Got hit by a gate arm today

    Couldn't keep it up eh? No worries it happens to everyone once in a while.

    0 Not allowed! Not allowed!

  24. #24
    Member kato617's Avatar
    Join Date
    Oct 2010
    Location
    Da Q
    Posts
    53

    Re: Got hit by a gate arm today

    I never had problem with my gate at the condo. Stay in the middle to open and when it does just go!

    0 Not allowed! Not allowed!

  25. #25
    Lifer 01xj's Avatar
    Join Date
    Jun 2010
    Location
    CT
    Age
    38
    Posts
    1,854

    Re: Got hit by a gate arm today

    Never had an issue when I park at Hartford Hospital. After I pay the first thing I do is make dam sure I give it enough gas to get all the way out to the edge of the street and not dawdle under neath the pole. Not saying you did that, but its always something I worried about.


    Or you could do what my friends dad did and just drive straight through it.

    0 Not allowed! Not allowed!
    Last edited by 01xj; 11-04-10 at 10:47 AM.

Page 1 of 3 123 LastLast

Similar Threads

  1. Product | Gate King
    By nt650hawk in forum Business & Product Reviews
    Replies: 7
    Last Post: 04-24-20, 07:48 AM
  2. Baby Gate
    By 06gixgirl in forum Wanted
    Replies: 0
    Last Post: 09-09-12, 04:02 PM
  3. Free: baby/dog gate
    By imkindafkedup in forum For Sale
    Replies: 17
    Last Post: 04-10-11, 08:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •