0
I'm wondering if the Master Cylinder has a leak at the end of the piston where the lever attaches. TINY bubbles come up from the piston area under the resevior, once and a while.....
I've gravity drained, cleaned and put ~14oz of new fluid through the clutch resevior.
I've bled the system by using a clear hose on the
bleeder screw.
Pull the clutch lever, Hold in........open slave bleeder screw, watch fluid come out, close bleeder, then release clutch lever.
Do again and again and again..more than 14 oz worth over 3 attempts.
No clutch action.
Amount of brake fluid discharged varies on bleed attempt.
In other words, sometimes a little comes out and others its 3x more fluid in the clear line.
Any BTDT on what I'm doing wrong?
No Mity Vac here. Thinking of a reverse bleed somehow.
-Suf Daddy