0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
My new project is a 2003 SV1000. I just got this for $500 so now I can keep the Hawk.
![]()
What up, bitches?
Ahhhhhhh an SV1000! Much different than the TL1000S as far as suspension goes. Have fun with your project. I'm sure you'll love the bike, they make great street bikes.
Joel
So what is different between the TL and the SV?
What up, bitches?
Yup going for a new look I'M just not sure what? (maybe this)
http://2wheeltuesday.com/2010/06/apc...-circus-tp199/
What up, bitches?
SVenpointsixtwo
2016 Honda CRF1000L Africa Twin
2015 KTM 350 XCF-W
What's different? Effectively everything but the bottom end!
Edit: I've got engine parts if needed.
Last edited by dontpanic; 07-04-12 at 01:59 PM.
It is a 2003 SV1000 it got stolen and striped and has been sitting for the pass 5 or 6 years. This is how I got it now what do I do?
![]()
What up, bitches?
Just cleaned it up best I could.
![]()
What up, bitches?
I need to pull the jugs to make sure it's ok. I have never done this only on two strokes so this should be fun it will never run again.
What up, bitches?
I have to put some $ in the SV. It was going to be fun as hell.
http://cgi.ebay.com/ebaymotors/Yamah...item1e712004b5
What up, bitches?
Here are the pics of the eng. This is how I got it. It has not been cleaned. It had no speedo so not sure how many miles it has but from the looks of it it's low.
I will post more pics next week when the parts get here.
![]()
What up, bitches?
Wirelessly posted (GS3)
Nice. I don't know if TL heads or came would fit bit it might be worth a look since you've got of torn apart.
When I start my KTM in the morning, rules are broken. Its inevitable...
01 SV650S (RC51 eater)/07 690SM /03 300EXC/14 XTZ1200
TRACKS:Firebird/NHMS/VIR/Calabogie/California Speedway/NJMP/MMC/NYST/Palmer/Thompson/Club Motorsports
Wirelessly posted (GS3)
That's my dream one day. Build a decent bobbed type of bike with a sportbike v twinOriginally Posted by stpierre
When I start my KTM in the morning, rules are broken. Its inevitable...
01 SV650S (RC51 eater)/07 690SM /03 300EXC/14 XTZ1200
TRACKS:Firebird/NHMS/VIR/Calabogie/California Speedway/NJMP/MMC/NYST/Palmer/Thompson/Club Motorsports
I just got this I have to make it work wish me luck.
http://www.ebay.com/itm/300513938662...84.m1439.l2649
What up, bitches?
Love the look but frame's are big $ and tons of work. The frame I like is $2,500 just the frame I have to pass on that for now.
What up, bitches?
That is a rigid frame so it's probably under $1000, problem is that it's RIGID! ever rode one?
second problem is all the fabrication you have to do
Duc swinger just got here.
What up, bitches?
How hard would it be to take off 4mm on one side and 9mm on the other?
![]()
What up, bitches?
I am still wondering how I will manage shock, linkage, and swingarm connection. The Duc had the linkage above the swingarm at the top shock mount and the SV has it below. There are no provisions for linkage below because the shock bolted directly to the swingarm. They also used different lower mounts on the shocks. The SV uses a clevice mount and the Duc uses a heim joint. I guess if you have the right types of shocks you could swap them if they both were adjustable ride height units with removable connectors?
What up, bitches?
All the eng parts are in now! woohoo.
What up, bitches?