0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
A* for $126 (i'll be a complete A* man w/ the suit, boots & gloves)
Joe Rocket for $81
Teknik for $63
See my post, I got somethin better & less expensive
what poll is complete w/o the old guy.... BEMUSED
Gonna get one since my jacket has NO protection whatsoever... using it for spirited street & trackday use.... which one do you use, which one would ya get?
since i'm probably gonna buy off of newenough.com i'll use their products & make a poll outta this, but i welcome all other suggestions
http://www.newenough.com/product_gro...body_armor.htm
![]()
![]()
I'm leaning towards either goin w/ the A* or Teknic... don't like the looks of the J.R. much at all.
And if i get the A* then i'll have A* 2-piece, A* boots, A*gloves & A* BP![]()
And once again, other suggestions are welcome... i'm not limited to just these three (er... two, since the JR looks like poo)
EDIT: here's another option
http://www.kneedraggers.com/details/35-AXO05-1
![]()
EDIT2: and another
http://www.kneedraggers.com/details/35-BOHN-14
![]()
Last edited by OreoGaborio; 02-06-05 at 12:21 AM.
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
RandyO
IBA#9560
A man with a gun is a citizen
A man without a gun is a subject LETS GO BRANDON
worth the extra dough over the A*'s eh?
Turns out Cal-Sportbike (a sponsor over on ODFU) can get me a discount, and on top of that is doing a group buy on A* stuff... i'm waiting to see what i can get for prices from him.
Here's my major folley though... i set a price for myself.... then see something that matches it... then see something that's better but more expensive... and it happens again & again & again.... that's how i spent 130 bucks on GLOVES after i only planned on spending 50-60![]()
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
i voted bemused because I have no info to offer you on back protection
You suck at life. Why don't you quit?
My dad told me I could be anything I wanted when I grew up. So I became an Asshole.
It's ok, even if you had a valid opinion i wouldn't listen to you..... cuz you hand feed wild bears you crazy mother fucker![]()
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
I have the A* protector, I like it but I got it last december and haven't had a chance to ride with it yet. If I end up going to the next drunkathon I'll bring it with me so you can see how it looks, plus when we're drunk we can all take turns wearing it and punching each other in the back, oh man that will be so much fun.
WOOO! KIDNEY SHOTS!bring it by man.... i think i'm leaning towards a Bohn, but bring it by... good times
![]()
Last edited by OreoGaborio; 02-06-05 at 03:10 PM.
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
what, no one's gonna mention RHINO ARMOR!
![]()
The only "intuitive" interface is the nipple.
Try em all on and try and see what is most comfortable. You won't wear it if it is annoying. All I can add is my Dainese one is just about invisible, you can't even feel it really, so I pretty much always wear it.
How much did it cost you?Originally posted by benVFR
Try em all on and try and see what is most comfortable. You won't wear it if it is annoying. All I can add is my Dainese one is just about invisible, you can't even feel it really, so I pretty much always wear it.
It's all water under the bridge, and we do enter the next round-robin. Am I wrong?
u guys know of any place local that sells that Bohn carbon/kevlar one? i'm thinkin i really like that one & wanna try it on under my jacket.
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
oh wutevah...
Thank you for your purchase !
We will be in contact as soon as possible.
Product ID: KC18
Product Name: Carbon-Kevlar Race 8-Plate Back Protector
Quantity: 1
Unit Price: 139.00
Unit Price: 139.00
--------------------------
Order Total : 139.00
Shipping : 8.50
Discounts : 8.50
Grand Total : 139.00
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
good for you man, I can't decide between that one or a pro racer or that one. you like it so far??![]()
yeah i tried it on & it fits pretty well... i'm just a touch over 5'9" and i'm glad i got the full size 8 pannel. Haven't had a chance to ride with it but it fits pretty good under my jacket.
only issue i have w/ it has to deal w/ my own skinniness... the waist strap is a little too loose, but i'm getting an extra piece of fuzzy velcro sewn into the strap so that'll solve the problem.
heh, kinda wish it looked more like the pic but who's gonna see it under my jacket?it's all black including the pannels, no yellow & no "KEVLAR CARBON" writing on it. but like i said, who gives a shit? the construction looks great. hopfully i'll never crash test it
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650