Where to get rearset bolt and pin?

[virtualbong]

I need a bolt for my right rearset as well as the pin that goes right behind the foot brake pedal.



Does anyone have extras of these pieces that would be willing to give to me or for a small fee?

[Expat]

The bolt you will be able to get anywhere. It is likely an M8 allen bolt, you can cut it to the correct lenght. The pin you could use a smaller bolt with a nyloc nut on it to get you by until you can find something. I will have both lurking somewhere in the depths of the garage but I am out near Worcester.
Any bike shop should be able to help you out.

[Rambunctous]

How the heck do you post a pic and draw circles and write on it. I got some pics of my ex I think I can have some fun with.

[Kurlon]

How the heck do you post a pic and draw circles and write on it. I got some pics of my ex I think I can have some fun with.

Load pic in MS Paint.

Make a Picaso.

Save, post saved file.

WIN!

[virtualbong]

The bolt you will be able to get anywhere. It is likely an M8 allen bolt, you can cut it to the correct lenght. The pin you could use a smaller bolt with a nyloc nut on it to get you by until you can find something. I will have both lurking somewhere in the depths of the garage but I am out near Worcester.
Any bike shop should be able to help you out.

Ok, I will head to Lowes to see if they have a matching bolt and who knows...maybe they will have a pin that I can use or something close to it that I can use. Thanks for the suggestions!

[Expat]

Ok, I will head to Lowes to see if they have a matching bolt and who knows...maybe they will have a pin that I can use or something close to it that I can use. Thanks for the suggestions!

Have a look for a local industrial supplier, they would be more likely to get you something that matches perfectly. You can use a bolt for the pin but make sure you get a locknut to stop it falling off or binding up. A replacement pin from a dealer should be a low cost easy accessible item and I would suggest this to replace the temporary bolt.

[hondarider102]

Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_8 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8E401 Safari/6533.18.5)

Usually local hardware stores have a better metric hardware section then lowes

[DuncanMoto]

Actually, you can try Fastenal in Brighton.

[CBR929RE]

Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_8 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8E401 Safari/6533.18.5)

Usually local hardware stores have a better metric hardware section then lowes

and in that same aisle they usually have drawers with various size pins in them. might find a pin that will work. then just slap a washer on the end and slide a cotter pin through the hole.