SV1000 Front Wheel Allen

[BostonSVkid]

Hey Everyone
Any one with an SV1000 have the 24 mm front wheel tool for getting the axle out?

[teamcubco]

Had one. Can't find it only paid $15 or so from a place like auto zone.........

[obsolete]

Bolt with the same outer diameter and 2 nuts works in a pinch.

[caddydaddy]

I use a threaded rod coupler on my Sprint. Cost less than a buck at Lowe's.

[Kitt]

I have one... could ship it to you to use if you have a free way to give it back (shipping both ways prob isn't worth it).

[obsolete]

If you're up on the north shore tonight I should be in my garage and could give you my bolt contraption, but it'd probably be cheaper to buy one from lowes than drive up to Salem.

[drop]

i have one in haverhill. 19/22/24mm.

[BostonSVkid]

i have one in haverhill. 19/22/24mm.

Are you guys saying buy 2 24mm nuts and threaded rod to get it out?

Oh and where in haverhill?

[Stoneman]

If you're gonna be up in B-stead this weekend, gimme a hollar. I have a universal one that works on all front wheel 'allens'...

I think MotionPro sells 'em, but I got mine from Noel...

[drop]

Are you guys saying buy 2 24mm nuts and threaded rod to get it out?

Oh and where in haverhill?

down the street from the old bradford college campus.

[BostonSVkid]

I dont mind buying one. Anyone know where I can find one locally? I just would rather not buy one from the dealer. Thanks

Oh and stoneman thanks. Trying to get the wheel off so I can get the tires done before this weekend. If that doesnt work out I will let you know but I will be in Bstead this weekend.

[drop]

not sure on your current location or schedule, but i'll be heading down 93S to boston in about 20 min if you want me to meet you somewhere off the highway.

[Stoneman]

I dont mind buying one. Anyone know where I can find one locally? I just would rather not buy one from the dealer. Thanks

Oh and stoneman thanks. Trying to get the wheel off so I can get the tires done before this weekend. If that doesnt work out I will let you know but I will be in Bstead this weekend.

If you need one before then, try Noel or DuncanMoto. DuncanMoto's a forum sponsor, BTW...

[Pigman]

I have a Bolt set up from HD...u can use it if you want i am in burlington

[obsolete]

Are you guys saying buy 2 24mm nuts and threaded rod to get it out?

Oh and where in haverhill?

I bought a bolt with a hex head that measured the same as the hex in the axle. I then bought 2 nuts that fit on said bolt.

Found this pic online

[BostonSVkid]

Thanks guys I appreciate the help...I found one finally and will pick it up tonight!