0


I know it's unlikely to happen but everyone that ever uses a torch or welder should be aware of this. I was unaware of the Phosgene aspect but my Oncologist was 95% sure that tetrachloroethylene was the cause for me getting cancer. Just a friendly reminder to be careful when using chemicals and read the MSDS sheets when they are available(all are available on line). OK off my soap box.-Jake
http://www.brewracingframes.com/id75.htm
.
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
It's basically mustard gas isn't it?
It's really nasty stuff, especially if you work on refrigeration systems. I've worked with my father a bit and when you un-sweat the piping you get a nice blast of it from the super heated / burnt freon left in the system, even after recovery.
damn thats rough good to know
![]()
www.bostonmoto.com
2009 Zx-6r--17,680 miles and counting!!
2008 ZZR600 - - - 10,268 miles totaled
Ride to live, live to ride
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_0_2 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8A400 Safari/6531.22.7)
Brakleen plus heat = bad shit.
Thanks for the link. Very interesting to read( I'm a refrigeration guy, can't count all the times I have burnt refrigerant with a torch while brazing). Very sorry to hear about your health. Tim
Thanks Tim but I'm good. Still maintaining remission.![]()
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
Thanks for posting this. I use brake cleaner and torches all the time (not together and never will after reading this)
Chlorinated hydrocarbons were more closely linked to liver damage
In Remington I walked in a cloud of triclene that would condense on you and run into your shoes.
Perchlorethylene is dry cleaning fluid
Freon is a fluoro chloro organic both fluorine and chlorine it will disassociate under heat into elemental gases.... acids in your system.
You will be happy to know that safety people and the government made industry use this because it was non flammable. The transformer fluid too.
Great info and warning Jake
I was using a cutting torch just last night after applying some Advanced Auto MPL on a really nasty bolt without a second thought.
TIMMYDUCK