0
So I'm cleaning the carb of the 07 wr250f tonight.
Bottom part of the carb where the plug screw resides.
I remove that bottom part off and well next thing I know on my work bench is a little metal pipe.
appears to have fallen out of the carb.
Now looking at the Parts diagram doesnt seem like that pipe is supposed to come out.
Anyone know for sure? assuming its a vent pipe of sorts
here is the diagram. part that fell out is the thin long cylinder on interior of carb running from 11o'clock to 5o'clock
I can put it back in the hole but it just seems like its going to fall out again. worse comes to worse i'll JB weld to make sure is stays in place