Chris Dinoia #446 bike rebuild parts list

[tnt2671]

Hi my names Todd (the slowest of the slowpokes) and as most of you prob read in the previous post were going to rebuild Chris's race bike so when he's healed up we can present him the bike back together looking pretty to do what he wishes w/ it. Larry just dropped the bike of to me so if anybody has any clean used or new parts they could spare plz pm or call me for shipping info or other arrangements to make this happen.

2003 YAMAHA r6
-batterie tray ( subframe plastic)
-slip on w/ hanger
-rear brake master cylinder and reservoir*********( pending mr kurtz)
- after market rearsets w/ controls
-frame sliders w/ mounts
-rear spools ************( senecake)
-woodcraft L side case cover skid plate
- upper triple *********(pending mr kurtz)
- fork caps / preload adjuters
-clip ons********( senecake)
-grips ***********( pending timmyduck)
- levers w/ perches
- front master cylinder w/ reservoir
- front fairing stay
-gauges

***we know shipping can get pricey esp on larger items , they'll be plenty of people up at the next loudon weekend who can get the stuff back our way*****



i'll update the list daily and a huge thanks to everybody for all your support!

*** Shipping info
TODD MANISCALCHI
114 AUTUMN ST
AGAWAM , MA
01001

phone 413 786 8982
email tnt2671@aol.com

[Mr. Kurtz]

Off the top of my head I'm pretty sure I have the rear master w/reservoir, and an upper triple(no ignition though). I also definitely have a stock slip on for the bike and stock rearsets(not sure which controls are there).

I'll check for some of the other stuff, and then make arrangements to get it all to where it needs to go.

[senecak19]

I'm waiting on a phone call from Eric Wood. Will update tomorrow with what I will have coming. PM me an address on where to bring the bodywork too. Its currently on hold at Woodcraft.

I'm assuming he has Woodcraft or Vortex clip-ons... that being the case I'm buying replacement bars.

If a windscreen doesn't show up, I will just buy one of those too for ya.

[tnt2671]

I'm waiting on a phone call from Eric Wood. Will update tomorrow with what I will have coming. PM me an address on where to bring the bodywork too. Its currently on hold at Woodcraft.

I'm assuming he has Woodcraft or Vortex clip-ons... that being the case I'm buying replacement bars.

If a windscreen doesn't show up, I will just buy one of those too for ya.

yup woodcraft c/ons , give me a shout tommorrow anytime so we can set something up, thanks todd

[TIMMYDUCK]

Heck, you guys are so fast up on this, I choose .

" Grips " Please just tell ,show, or link in whatever is needed, and it is done.

[senecak19]

I think I have an extra set of Woodcraft REAR SPOOLS.

I talk to Kitt and were "attempting" to locate an exhaust. No commitments yet, but were looking.

[senecak19]

Can you post pictures of the rearsets? Sometimes parts are salvageable. Kates has a press I believe that can straighten some pieces if need be.

[Scottg22]

I have a Subframe. Let me know.

[RyanNicholson]

I'll check my parent's garage this weekend, I've gatta have some of this stuff laying around from my old race bike. I'll post up if I find anything.

[tnt2671]

Can you post pictures of the rearsets? Sometimes parts are salvageable. Kates has a press I believe that can straighten some pieces if need be.

dont have any pics avail but i have fixed them before, the right side might be salvageable , the left is twisted up pretty good. but worth a shot.

[tnt2671]

-MR KURTZ , the upper triple , and rear brake setup would be great and any foot controls you may have , kitt and senecake are working on exhaust so put that on hold for now

- SCOTTG22 , that subframe would be a great help

-TIMMYDUCK , any grips you wish thanks

i added my shipping info to the orig post

[senecak19]

When you take the bike to GMD take the bent pieces and see if someone can straighten them. When you refer to foot controls are you talking pegs?

[jpallein223]

i got the tank. larry knows

[tnt2671]

[QUOTE=senecak19;947260]When you take the bike to GMD take the bent pieces and see if someone can straighten them. When you refer to foot controls are you talking pegs?[/QUOT

if i dont get to a press before the bike goes to pk i will bring'em along , yes pegs, shift & brake . everything hanging off the rearsets is ripped off or broken

[butcher bergs]

If there's anything in the NH area I can grab, let me know. I'm near Nashua and wouldn't have a problem being a middle man in order to get the parts to their destination quicker.

Anyone is welcome to PM for contact info if I can be of any help.

[CMG241]

if you do not come up with a slip on please post a pic of the damage, I might be able to repair. I am at track tomorrow and Aug 7 if some one can bring it there

[Slowpoke387]

Chris do you do carbon fiber weave repair? The can is carbon and it's torn up but still all there. Mid pipe's got a good dent too.

[union]

Chris do you do carbon fiber weave repair? The can is carbon and it's torn up but still all there. Mid pipe's got a good dent too.

I know a guy that might be able to get a carbon fiber sleeve. Hes kind of an odd dude and I dont really like dealing with him but I know he makes his own exhausts for bikes. Get me the dimensions and Ill see what I can do.

[CMG241]

Chris do you do carbon fiber weave repair? The can is carbon and it's torn up but still all there. Mid pipe's got a good dent too.

sorry, thought it was stainless steel. I can't do carbon

[FireboltEric_MA]

I have THIS stuff if you need any of it.

All i have left from Ryan's race bike when i bought it. Your more than welcome to it all. I have no use for it and it would be nice to offer it up for good cause.

VERY COOL WHAT YOU GUYS ARE DOING FOR HIM

LMK

[tnt2671]

I have THIS stuff if you need any of it.

All i have left from Ryan's race bike when i bought it. Your more than welcome to it all. I have no use for it and it would be nice to offer it up for good cause.

VERY COOL WHAT YOU GUYS ARE DOING FOR HIM

LMK

is this stuff of an s model? if so that would be awesome , if its off an 06 v model i dont know if its compatable.

[FireboltEric_MA]

yes it is an "S" model.

2006 R6-S Ryan Nicolsons old race bike i bought from him.

Should be what you need...I hope..

[Scottg22]

Subframe is shipping out today UPS Ground. You should see it tomorrow.

SG

[Pigman]

I am a Broke racer also but would like to help>>>>>>>can some one who knows whats been bought and what hasnt PLS Pm me with a smaller Item to buy.....

Leavers
Winshield
Grips
Stomp Girp???



anything or any idea of what to get........PLS......Thank You.....

[FireboltEric_MA]

I will be at the next race weekend and can bring the box of parts up.

Who do I see to make the hand off to?

Thanks