Daytona Gearing for a sv650 Anyone Know??

[pasta-rocket]

???? Anyone know the gearing for Daytona??? I have a 2005 SV 650

[smf]

Wirelessly posted

You're doing Daytona again?? Oh man. You have to catch up with ginos dad when you're there.

[pasta-rocket]

Yup, Back to Daytona! I am going to give Ginos old man a call for sure.

[Degsy]

Wirelessly posted

Just put the rear one on the front and the front one on the rear. That'll be close enough.

[smf]

Wirelessly posted

Yup, Back to Daytona! I am going to give Ginos old man a call for sure.

Wow. I need dawn to talk to agata this winter

[pasta-rocket]

I have a 45 on the rear for loudon, just put a 41 on and also have a 37.38.39. 40 Jesus these sprockets are small!

[The Snowman]

Good luck in FL Ryan!

Thanks for hooking me up with John for the clutch this past weekend.

[Pigman]

I would ask on the WERA forum.....I am sure there is a few that will chime in

[Awesome]

I'd gear it for top speed on the SV, having Loudon as your home track, you don't have to worry about getting the best grunt out of the engine on the infield. Recommendations will get you in the ballpark, but a little difference in HP, weight, body position, draft, etc are going to make a big difference.

[smf]

Wirelessly posted

Grab a few fronts... you don't want to run out of chain adjustment by going too small on the rear.

Gearing for top speed at Daytona? That'll never work.

[Awesome]

Wirelessly posted

Grab a few fronts... you don't want to run out of chain adjustment by going too small on the rear.

Gearing for top speed at Daytona? That'll never work.

Explain?

[smf]

Wirelessly posted

Grab a few fronts... you don't want to run out of chain adjustment by going too small on the rear.

Gearing for top speed at Daytona? That'll never work.

Explain?

1st point: just a recommendation. Sucks to have to resize the chain.
2nd point: sarcasm

[daviid]

i ended up with a 14/44 or 14/43 i believe. my notes are at home and im in the bahamas

[13]

As a rule of thumb, I've heard "go 1 or 2 teeth down in the back from stock".

I want to go with you.

[Alilyoyo1]

when u getting here? I'll be in a garage with Andy White, Matt Daughtery, and im sure a few others. I think Matts on an SV I'll ask him

[pontifex]

you guys doing penguin down there?

[csmutty]

you guys doing penguin down there?

Team Hammer? Yup.

Ill be getting there Wednesday evening.

[Alilyoyo1]

k. I wanted to make sure...and he is on the SV so I'll let u know what he says about gearing.

[nt650hawk]

Ran 17-40 and had to cut a link out to work on the hawk

[pasta-rocket]

Ran 17-40 and had to cut a link out to work on the hawk

I am getting down there on Tuesday night. Running hammer on Thursday. Thanks for the info.

[Alilyoyo1]

said he was going to check his notebook but
thinks he ran 16-43 last year