0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
Thanks Josh. I have a belly pan but the bike has a Hindle exhaust so it may not fit. This might be my only option
I still have one hanging on the wall. Complete with holes from the BFSP race on Dumpster Fire.
Get some stiffer springs to keep it from dragging badly. You ain't no jockey mang
LRRS/CCS Expert #820 / RSP Racing / Woodcraft / MTAG Pirelli / Dyno Solutions / Tony's Track Days / Sport Bike Track Gear / GMD Computrack /
I did ordered new fork springs. The belly pan I have may work but its kind of beat up. Not sure if i need to order a new one.
Patch it up, fiberglass isn't too hard to work with if you're going for function over looks.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Your 500 lol
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Clever sir!
What company makes bodywork for these bikes?
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
thank you, just incase I need to order one. I might just do what josh did.
Ducati/MV Agusta/Kawasaki/Beta
#277
Boston Tier 1 Racing/ Fishtail Instructor
DP Brakes Northeast Road Racing Representative
There are three current LRRS racers (BJ Horsham, Joe Latona NESR screen name - smokinjoe, and John Lear) in garage 12A that race EX500's. They as well as Dana Temple (Penguin school) can provide great information about that bike. They might already have bodywork / belly pan that will fit.
Last edited by lrrs398; 12-30-19 at 01:23 PM. Reason: Update
I will have to get in contact with them. A new pan is 172 bucks from that airtech place
Can you run a lightweight battery in USCRA? I assume not
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Ok that's what I thought
Oh really! Ok thats good to know. I need a new battery so I was thinking of getting a shorai
That just seems so wrong haha.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
That sounds complicated josh! But, its a very valid point!
Ducati/MV Agusta/Kawasaki/Beta
#277
Boston Tier 1 Racing/ Fishtail Instructor
DP Brakes Northeast Road Racing Representative
bump start the fucker like 90% of the bikes there
Gino
HAWK GT Racer Expert #929
2012 CCS LRRS ULSB Champion
2012 CCS LRRS P89 Champion
2008 CCS ULSB National Champion
ECKRACING Bridgestone Street & Competition Woodcraft MOTUL On Track Media Pine Motorparts Vanson Leathers
Would this be acceptablehttps://www.airtech-streamlining.com.../EX5003OCP.JPG for a pan??
Ducati/MV Agusta/Kawasaki/Beta
#277
Boston Tier 1 Racing/ Fishtail Instructor
DP Brakes Northeast Road Racing Representative
Well... look at the rulebook and see if it meets the requirements?
Feels like the last sentence is cut off but that's how the rule is written. If you can suitably attach that pan, and it'll hold the required volume while covering the bottom of the motor it'll work once you add an absorbent pad as required.Originally Posted by 2019 USCRA Rulebook
Ducati/MV Agusta/Kawasaki/Beta
#277
Boston Tier 1 Racing/ Fishtail Instructor
DP Brakes Northeast Road Racing Representative