0
I have a 05 Honda Cbr 600rr with a little over 10,000miles. Recently I noticed a little bit of "slipping" when under acceleration and shifting gears. I did a search and found that more then likely my chain is loose. I had about 2 inches of freeplay in it. I have never adjusted my chain or any chain for that matter before. I looked in the manual and was able to figure it out. However after lubing I started it up on the stand and let the bike idle so I could watch the chain in action. Something just doesn't appear to be right. Is there anything I should know about like any tricks to make sure every thing is alligned? Anyone near Beverly that wants to show me the right way? I only need to be shown once. I could use a hand because I really don't want to F anything up. Thanks