0
So, a couple days after I bought my bike, I ended up having to take the tail plastics off to remove a rusted bolt that snapped and was stuck in the frame. When I decided to do this, like an ameteur, I figured the process was easy enough and didn't pay attention to what bolts/screws went were. Anyways, I put it back together and ended up with two bolts that don't fit where I believe they were before. It's been bugging the hell out of me, so I took the tail back off and tried to see if I maybe mixed a couple bolts up, but ended up with the two bolts/washers and two unbolted areas.
FYI the PO kinda frankenstein'd the bike nuts&bolts-wise so I'm not sure if the bolts/washers I took off even fit there correctly to begin with. I checked the microfische (http://www.ronayers.com/Fiche/TypeID...VER_(SV650K6)_), and I think what I'm looking for is #11, 12, and 13.
Also if anyone just so happens to have their SV apart and has a picture of what actually fits here that would be outstanding as well.
Location
Bolts that fit nowhere