0
Oil leak fixed, was just a head cover bolt that was partly stripped at one point and replaced.
Still no start after a few hours of pounding on it but I have two major suspects: exhaust valve rocker and carb. One of the rockers had significant wear. The rocker shaft didn't want to come out easily so I used the old rocker but it definitely needs replacing. So I'll swap that out.
Carb was cleaned w/ ultrasonic and pine sol but after sitting a year I noticed a whiteish film/dust buildup, so I'm not convinced the carbs operating at 100%. Have a full rebuild kit/needles/jets coming.
Heading to the mountains this weekend but hopefully knock those out next week if the kit comes expediently. Until then have a few washers & misc bits to order, new clutch cable coming, and a Vapor dash to set up.
Also gotta decide on paint & plastics... all the black & black seat it looks like some zombie apocalypse bike not really my taste, thinking I might go to Suzuki yellow, looking at plastics and some CEET tank graphics. Kind of like the yellow seat now that I'm looking at it.. needs a cleaning though. Will worry about that if/when she runs again though!