Welcome to NESR! Most features of this site require registration, including replying to threads, sending private messages, starting new threads, and uploading files. Click here to register.

Results 1 to 8 of 8

1991 GSX-R750 Camshaft Bearing Caps

  1. #1
    Lifer oVTo's Avatar
    Join Date
    Jun 2003
    Location
    North of Boston
    Age
    63
    Posts
    1,369

    1991 GSX-R750 Camshaft Bearing Caps

    My next door neighbor's kid was replacing the head gasket on his '91 Gixxer 750, and when buttoning down the head he stripped two of the camshaft bearing caps. They can't be helicoiled because the caps split into pieces. I checked Bikebandit and Ron Ayers for him but it doesn't look like the parts are available. I tried a used parts place, but no luck with that so far either.

    Any suggestions for finding dinosaur gixxer parts to get the bike back together?

    0 Not allowed! Not allowed!
    DanG
    People almost invariably arrive at their beliefs not on the basis of proof but on the basis of what they find attractive.
    - Blaise Pascal

  2. #2
    Lifer gixxer72's Avatar
    Join Date
    Sep 2008
    Location
    The desert
    Posts
    2,998

    Re: 1991 GSX-R750 Camshaft Bearing Caps

    Quote Originally Posted by oVTo View Post
    My next door neighbor's kid was replacing the head gasket on his '91 Gixxer 750, and when buttoning down the head he stripped two of the camshaft bearing caps. They can't be helicoiled because the caps split into pieces. I checked Bikebandit and Ron Ayers for him but it doesn't look like the parts are available. I tried a used parts place, but no luck with that so far either.

    Any suggestions for finding dinosaur gixxer parts to get the bike back together?
    Maybe see if 88-92 caps are interchangeable, check the Katanas too (cams will drop in so caps are probably the same)

    I can't remember if 91-92 had threaded adjusters or not though, might be some changes from the earlier 88-90 engines..

    0 Not allowed! Not allowed!

  3. #3
    Lifer gixxer72's Avatar
    Join Date
    Sep 2008
    Location
    The desert
    Posts
    2,998

    Re: 1991 GSX-R750 Camshaft Bearing Caps


    0 Not allowed! Not allowed!

  4. #4
    Dictionary quoting knob stoinkythepig's Avatar
    Join Date
    Dec 2002
    Location
    Raymond NH
    Age
    58
    Posts
    4,686

    Re: 1991 GSX-R750 Camshaft Bearing Caps

    The caps are usually machined with the head and not interchangeable between engines. Best bet is to get another head. They are usually cheap.

    1 Not allowed! Not allowed!

  5. #5
    Lifer oVTo's Avatar
    Join Date
    Jun 2003
    Location
    North of Boston
    Age
    63
    Posts
    1,369

    Re: 1991 GSX-R750 Camshaft Bearing Caps

    Quote Originally Posted by stoinkythepig View Post
    The caps are usually machined with the head and not interchangeable between engines. Best bet is to get another head. They are usually cheap.
    Yeah, I thought that was the case, especially when I didn't see separate part numbers on the fiche. Thanks for confirming. It's not what I was hoping to hear, but it's good to know. It increases the cost and time to repair by quite a bit, but replacing all the gaskets was probably needed anyway. I found a head on ebay for $250 that will probably do.

    Thanks for all the replies.

    0 Not allowed! Not allowed!
    DanG
    People almost invariably arrive at their beliefs not on the basis of proof but on the basis of what they find attractive.
    - Blaise Pascal

  6. #6
    13/f/MA/on period. Garrett's Avatar
    Join Date
    Feb 2012
    Location
    02339
    Posts
    1,797

    Re: 1991 GSX-R750 Camshaft Bearing Caps

    Doh! I just scrapped a '91 motor last weekend.

    0 Not allowed! Not allowed!
    Too many bikes to list
    http://oneguytwowheels.blogspot.com/
    Mosdt likely drunkd

  7. #7
    Lifer oVTo's Avatar
    Join Date
    Jun 2003
    Location
    North of Boston
    Age
    63
    Posts
    1,369

    Re: 1991 GSX-R750 Camshaft Bearing Caps

    Quote Originally Posted by Garrett View Post
    Doh! I just scrapped a '91 motor last weekend.
    That sucks. No chance of recovery?

    0 Not allowed! Not allowed!
    DanG
    People almost invariably arrive at their beliefs not on the basis of proof but on the basis of what they find attractive.
    - Blaise Pascal

  8. #8
    13/f/MA/on period. Garrett's Avatar
    Join Date
    Feb 2012
    Location
    02339
    Posts
    1,797

    Re: 1991 GSX-R750 Camshaft Bearing Caps

    Nah some shitbag showed up to my house and took it all excitedly.

    0 Not allowed! Not allowed!
    Too many bikes to list
    http://oneguytwowheels.blogspot.com/
    Mosdt likely drunkd

Similar Threads

  1. Broken Camshaft Holder
    By ChicknStripEatr in forum Bike Maintenance
    Replies: 16
    Last Post: 06-09-14, 01:56 PM
  2. GSX-R750 On Ice Tires?
    By LXnastynotch93 in forum General Bike Related
    Replies: 4
    Last Post: 12-07-13, 06:06 PM
  3. 2008 GSX-R750 in MA
    By PB in forum For Sale
    Replies: 5
    Last Post: 12-05-13, 02:32 PM
  4. My 86 GSX-R750 LTD
    By Kenn157 in forum General Bike Related
    Replies: 35
    Last Post: 05-08-09, 04:08 AM
  5. WTB Honda CRF450 R camshaft
    By KB in forum For Sale
    Replies: 3
    Last Post: 03-12-07, 03:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •