650r Chain/Sprocket Question

[timv2444]

Hey everybody,
While riding it sounds like my chain is working pretty hard. I dunno if it's bad rear wheel alignment or too tight of a chain. I've only had the bike for one season and put on about 3k. The rear sprocket doesn't seem to be worn. I planned on replacing the chain and sprocket in the near future anyways Any help would be appreciated. Located in Shirley,MA

Thanks again

[G21forme]

Location

[timv2444]

Forgot location -- Shirley,MA

[Jim]

Describe working hard.
Who put the current chain/sprocket on?

[timv2444]

Sounds like a constant growl / clicking noise. I don't know who put on the current chain/sprocket. I'm still fairily new to the street so may be normal but I don't know. Thanks

[maxim_X]

How much play is in the chain? You should be able to move the chain up and down 1" total movement at least. It's more likely overtight than undertight. If it moves up and down more than 2" it's probably too loose. Those are just general guidelines. For some more specific information on your specific bike search google.

[hondarider102]

Wirelessly posted

If you wanna meet up I can take a look at it for you.

[timv2444]

Chain play is only about 1/2" up and 1/4" down.

- Corey, I'll try to narrow down a day and I'll shoot u a pm and see if your avail. Thanks

[maxim_X]

That sounds way too tight. It can put unnecessary stress on lots of things. Is it tight to the touch? It should seem loose.

[timv2444]

Yeah it does seem tight. I imagine when I'm riding it's tighter, correct?

[maxim_X]

Yes it will tighten up as soon as you sit on it.

http://www.youtube.com/watch?v=D_WdhZGJsTg

[timv2444]

Damn that's not good. So should I strt from scratch with a new setup that is adjusted properly? I bet the chin and sprockets are somewhat damaged.

[e30addict]

1-1.5" is what your slack should be.



You can download all sorts of info from this site, including the factory service manual.

http://homepages.slingshot.co.nz/~shanetp/Index.html

[maxim_X]

Before you ride it again give the chain some slack. I wouldn't go as far as replacing everything already. Loosen it up, ride it, and check the chain for loose rolllers and binding links.

[timv2444]

Thanks guys' I'll do some adjusting tomorrow and keep you posted.

[DaveZX6r]

Did you get it new from the dealership? I'd call them up and bitch.

[scubasteveRR]

I'm also right down the street from you in Bolton. If Corey's working I'll be around all day tomorrow if you want to swing by or I can take a ride over since I hear the sun may be out.

[tsorfas]

Wirelessly posted

If you wanna meet up I can take a look at it for you.

Text me I need your help when u get a chance

[hondarider102]

you know my number lol

Text me I need your help when u get a chance

[timv2444]

Hey guys' finally got around to adjusting my chain slack. The bike seems to ride better, and the stress on the chain sounds like its reduced.
--Corey and Scuba I my take one of you up on just checking it out and make sure everything is copacetic. Either of ou guys free next Sat / Sun for a few? Thanks nd let me know.

[hondarider102]

Wirelessly posted

Hey guys' finally got around to adjusting my chain slack. The bike seems to ride better, and the stress on the chain sounds like its reduced.
--Corey and Scuba I my take one of you up on just checking it out and make sure everything is copacetic. Either of ou guys free next Sat / Sun for a few? Thanks nd let me know.

I'll be around until 1130 on Sunday

[timv2444]

Corey,

Maybe next weekend. I got called into work for Sunday. Booooo. Thanks man

Wirelessly posted



I'll be around until 1130 on Sunday