0
Clutch was working fine before removal. The pressure was realeased during chain removal and now we put it back together it has no resistance in lever. We drained all the fluid after bleeding the system several times thinking something was clogged or stuck in the line. After looking everything over, blowing through the lines we filled it back up and bled it several times but still no resistance in lever and clutch won't engauge/disengauge. The piston moves in the slave cylinder when the lever is pulled, but there isn't enough pressure (it seems like, you can't really hold it back with your fingers) to disengauge the clutch. We even put a c-clamp on the piston but still no resistance in the lever. Any ideas to try or what could have caused this? Bad master cylinder or slave cylinder maybe?