99 GSXR Front End in an 86 GSXR

[csmutty]

I have a 17" rear rim on the 86 GSXR1100 and am looking to get a 17" rim on the front too. In order to do that I have to swap the whole front end over. Now the bottom bearings on the triple are the same, but the top bearings are different. The 86 top bearing is a 25x47x15 and the 99 is a 30x55x17. Now would the bearing that I have to get be a 30x47x15?

[Zero]

My memory is not 100% on the specifications for all of the swaps, but you should be able to use Zoran's bearing. You'll lose the cable speedometer also.


http://www.twfracing.com/zparts.html

-Dave

[csmutty]

My memory is not 100% on the specifications for all of the swaps, but you should be able to use Zoran's bearing. You'll lose the cable speedometer also.


http://www.twfracing.com/zparts.html

-Dave

Sweet thanks! I am looking to upgrade to a Trailtech dash or an Electrosport one. So that won't be a problem.