1
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
nothing to see, move along
yeah sucks to be you doesn't it. she's even been to my house and is coming over again on friday. its cause I'm cooler than you AND better looking
at least I got the right kind of rum.
no credit for going to the store to get the burgers so fuck all of you.
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
Thanks Degs and everyone else, I learned a lot and was awesome meeting everybody. Also nice seeing everyones disgusted faces rolling up/leaving on my ugly adv bike with all the pretty sportbikes parked next to mealso thanks to scotty for telling me about how to fix my garbage shoulder!
Cliff's Cycles KTM
NETRA enduro B-vet
Close your eyes, look deep in your soul, step outside yourself and let your mind go.
Thanks again Degsy.
Max also appreciates everyone's head scratches.
no party here. I don't keep gixxer parts at my house if I can help it.
I left about 9:00. bike is still there with the cams out. half the intake and all the exhaust were out of spec. found a couple scratches/flakes on the cam lobes so Degsy is looking into whether they need to be replaced or not. clearly I was jinxed by the talk of it being a Honda and probably not needing anything.
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
Wirelessly posted
Thanks everyone for coming. I hope everyone enjoyed themselves and got what they needed out of it. Beth enjoyed getting the refreshments ready. I had a blast too.
Zip-Tie Alley Racing
LRRS/CCS #103
PPS | Dunlop | Boston Moto | Woodcraft & Armour Bodies | 35 Motorsports | Pit Bull | K&N
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
Yeah, thanks a ton Degsy and Beth, and great to meet everyone! I honestly didn't think I was going to understand valve adjustments when we started talking about it in the morning, but then actually going through the process and relating it back to the diagram explanation, it all made a lot more sense. Still probably not gonna go tearing into motors myself for a while, but it's nice to have a handle on what's going on.
Wirelessly posted
Forgot to say a HUGE thanks to Chip and Scott for helping out and to Brett for running shopping errand AND bringing Sailor jerry.
LRRS Am #331
Graphic Tailor / Woodcraft / Armour Bodies / Suomy / Cycle Performance Autobody / Shorai / ChickenHawk Racing
Derek can you tell what brand and model of that Micrometer we were using upstairs?
I'm pretty sure it was a mitutoyo digimike
Wirelessly posted
Mititoyo 293-344 coolant proof 0-1" mic.
Might have to order one.
Wirelessly posted
Get a MIC stand. Cheap and makes it much easier to use.
Cool thanks for the tip.