0
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](http://www.nestreetriders.com/forum/images/buttons/up_dis.png)
My piece 'o shite Harbor Freight pliers finally completely died. I tried a couple of auto parts stores and got nothing but blank stares.
Any suggestions for finding a decent pair locally (Lowell area)? I'd like to finish my wiring tomorrow night if possible.
Thanks,
DanG
People almost invariably arrive at their beliefs not on the basis of proof but on the basis of what they find attractive.
- Blaise Pascal
How far north of boston are you? You could borrow my piece o shit HF pliers if you can't find a pair. I work in Newburyport 8-6ish and will be in Georgetown for a short period after that.
edit: um... you did say lowell area, didn't you. Whoops. I suppose that puts Tricky Mike a whole lot closer to you than me.
Last edited by "Dangerous" Dan K; 05-21-09 at 06:34 AM.
I got my set of Milbar's at Sears hardware of all places, they were about 100 bucks but they did have them...this was awhile ago.
REAL safety wire-ers wire by hand! that's right, i said it!![]()
What?
BMS-Billerica Motorsports has them also......PM Sheppo
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
Thanks for the answers and offers everyone!
I'm gonna ride to Woohstah tomorrow and get some cheapos at Harbor Fright. For $7 each, I'll buy a few and hopefully by the time the all break I'll feel better about springing for a good pair.
I'll be at the TTD next week. If anyone wants a pair, ping me and I'll buy extra.
DanG
People almost invariably arrive at their beliefs not on the basis of proof but on the basis of what they find attractive.
- Blaise Pascal
http://www.mcmaster.com/#5296a61/=1zei0b
5296A61
You will only need to pay for these once.
Gino
HAWK GT Racer Expert #929
2012 CCS LRRS ULSB Champion
2012 CCS LRRS P89 Champion
2008 CCS ULSB National Champion
ECKRACING Bridgestone Street & Competition Woodcraft MOTUL On Track Media Pine Motorparts Vanson Leathers
![]()
I bought thier kit of three so as to be able to reach those tight spots and have sharing capabilities. but I never have to buy again.
---------------------------------------------------
Originally Posted by hammadown .....The rule is:
If even Zip Tie Alley says, "no you shouldn't use a zip tie on that" you REALLLLLLY shouldn't use a zip tie on that! lol