Galfer brake line parts

[Dip Dungles]

Would anyone happen to have a double banjo bolt for a gsxr? I have been trying to get in contact with Galfer but with no success. I just need the banjo bolt along with washers. 06 gsxr 600

[jcbell1007]

I might. What's the banjo size? It's smaller than the sv right?

[Dip Dungles]

That's a great question that I do not know the answer to. Paging Jim and Pigman.............................................................

[boloson]

stock MC?

[Dip Dungles]

stock MC?

yezsir

[Jim]

let me talk to my Galfer peeps and see what i can do

[Dip Dungles]

let me talk to my Galfer peeps and see what i can do

Thanks Jim. I contacted Galfer 3 months ago and the "nice" sales girl offered to send me the bolts and washers free of charge........

Still waiting

[boloson]

i have a double banjo from a spiegler line ( i assume it'll be the same) but it's for a brembo mc. i have some single banjos if u need them for stock mc

[Degsy]

Wirelessly posted

Brembo MC takes a finer thread.

[csmutty]

I'd ditch everything Galfer and get a new set of lines. Galfer sucks. Unless you want your lines failing....then you should keep them on there.

[Dip Dungles]

I'd ditch everything Galfer and get a new set of lines. Galfer sucks. Unless you want your lines failing....then you should keep them on there.

Well damnit. Way to bust my bubble. LOL

[G21forme]

I'd ditch everything Galfer and get a new set of lines. Galfer sucks. Unless you want your lines failing....then you should keep them on there.

Is this a personal opinion or documented racer belief type thing, I have galfer lines.... Don't scare me smutts

[Jim]

I'd use them on my bike.

[The Snowman]

I'd ditch everything Galfer and get a new set of lines. Galfer sucks. Unless you want your lines failing....then you should keep them on there.

Is this a personal opinion or documented racer belief type thing, I have galfer lines.... Don't scare me smutts

I had an end fitting crack open with the required 16.5 ft lb of torque applied to the banjo bolt.

No, I didn't send them back, because I moved onto a better brand, Spiegler. I wasn't going to take the chance that it would happen again.

[csmutty]

Is this a personal opinion or documented racer belief type thing, I have galfer lines.... Don't scare me smutts

I had a line fail on my r6 this year where the line meets the fitting at the crimp. They were new at the beginning of the year. When I posted it on fb many others posted the same problem. That's enough for me to stay away. Jim would use them because he is sponsored by them.

[Jim]

I use their rotors, but would use their lines also

[Jim]

PM coming your way

[Dip Dungles]

Giggity

[Jim]

For the record: smutty sucks

[csmutty]

For the record: smutty sucks

For the record...check your crimps periodically.

[Dip Dungles]

For the record...check your crimps periodically.

Will do and parts being shipped via Galfer. Thanks ya'll

[G21forme]

For the record...check your crimps periodically.

How exactly do you do that? Btw I have superbike lines if that makes any difference.

[csmutty]

How exactly do you do that? Btw I have superbike lines if that makes any difference.

Make sure theres no fluid at the crimp. That's where mine went.

[Dip Dungles]

Make sure there's no fluid at the crimp

That sounds dirty to me

[Jim]

glad i could help dude.
smutty still sucks