0


Wanted, open aluminum Trailer bed requirements are 6.5' + X 12' or larger not including fender/wheel well.
Must have a rear ramp capable of 1500 lb load.
Trailer GVW 2500 or more. Double axle preferred.
A large enough enclosed trailer with a 7 Foot ceiling would also be considered. Same weight and ramp requirements.
Thanks.
Mike
Rides: 13 Hyperstada, 09 SFV650, 97 CBR 900RR
www.tailofthedragon.com
RIP A.B. RIP BEET, I Ride in Leathers because I would rather sweat than Bleed...
Single axles are usually rated just under 3k GVWR.
What's your budget?
Nothing in mind, If I find the perfect Enclosed Trailer I can sell My current enclosed and spend more.
I am going to look at an open deck Aluminum trailer this Saturday and it's $2300.
For the right car hauler type open trailer I would go maybe to $3500, Enclosed Maybe as far as $8K
Last edited by Half Squid; 11-07-19 at 08:21 PM.
Rides: 13 Hyperstada, 09 SFV650, 97 CBR 900RR
www.tailofthedragon.com
RIP A.B. RIP BEET, I Ride in Leathers because I would rather sweat than Bleed...
Sorry. I thought we were talking enclosed.
As you were.
If its big enough.
The enclosed i have now is 7X14 with a 6' ceiling.
I need bigger and slightly wider!
Then I'll sell mine and step up!
Rides: 13 Hyperstada, 09 SFV650, 97 CBR 900RR
www.tailofthedragon.com
RIP A.B. RIP BEET, I Ride in Leathers because I would rather sweat than Bleed...
What are you trying to fit into said trailer? This may give the audience, you are asking the question of, a better idea what they should recommend to you.
That's top secret..
I'm all set, picking up a 7X12 aluminum open trailer tomorrow. Might even upgrade once i get there if I see something better.
It's a SXS BTW..
Rides: 13 Hyperstada, 09 SFV650, 97 CBR 900RR
www.tailofthedragon.com
RIP A.B. RIP BEET, I Ride in Leathers because I would rather sweat than Bleed...