WTB: 95 and up front and rear end complete with wheels and brakes

[landricscustoms]

WTB: 95 and up front and rear end complete with wheels and brakes to resto-mod a vintage bike to superbike status. pm me if you have something you are parting out.

[CBR929RE]

WTB: 95 and up front and rear end complete with wheels and brakes to resto-mod a vintage bike to superbike status. pm me if you have something you are parting out.

any bike in particular you're looking for?

[landricscustoms]

not really. i'll make it work.. not looking to spend a ton. just upgrade my bike

[BLACK SQUIRREL]

I Have A set of SV brakes with steel lines and new pads

[CBR929RE]

not really. i'll make it work.. not looking to spend a ton. just upgrade my bike

I have a swingarm and rear wheel and cush drive assembly from a CBR929. I'll go out and check later today and see if I still have the shock, linkage and brake carrier bracket..

[landricscustoms]

THANKS GUYS.. CBR, let me know if you have the complete set-up and how much

["Dangerous" Dan K]

I have a buddy selling a complete ZX front end. Unsure of year, I'll direct him here.

[landricscustoms]

I have a buddy selling a complete ZX front end. Unsure of year, I'll direct him here.

VERY INTERESTED!!!!

["Dangerous" Dan K]

OK, my buddy is not a big poster on this forum so I told him I'd post up for him. He's actually got a couple options for ya.

1) Complete ZX7 front end. Brakes, clip-ons, everything. $200.




2) GMD set up full race F2 front end, Brembo master, braided lines, etc. $500. No pics of this one as of now.


edit: He's also got a Hawk rear end, if you're looking for a single sided swingarm deal.

[6 Fingered Man]

If you are looking for a cool rear end for your project i have a Hawk single sided swing arm...

["Dangerous" Dan K]

If you are looking for a cool rear end for your project i have a Hawk single sided swing arm...

So much for him not posting much here, I guess he just thought it'd be easier to have me post the pics

[CBR929RE]

ok I just went out to the shed to check on this stuff. I have a swingarm, brake caliper bracket, and dogbone from the linkage. no shock or linkage plates but they are readily available on ebay. I know I have the cush drive, axle and spacers somewhere too, just gotta dig them out. $100 sound ok? if you still want it.

[landricscustoms]

I WANT THE FRONT END... how much for the single side?? with wheel????, brakes??

[6 Fingered Man]

I WANT THE FRONT END... how much for the single side?? with wheel????, brakes??

What front the ZX???

I have rear wheel.... Actually a couple options, and i have brakes and lines... $250 for the rear end with wheel, breaks, hub, basically ready to bolt on. or

$350 with a Marvic magnesium rear wheel, that will have to be modded a little to fit the rear end..

[CBR929RE]

ok I just went out to the shed to check on this stuff. I have a swingarm, brake caliper bracket, and dogbone from the linkage. no shock or linkage plates but they are readily available on ebay. I know I have the cush drive, axle and spacers somewhere too, just gotta dig them out. $100 sound ok? if you still want it.

I forgot I also have a rear wheel. $225 for the whole thing.



but I'd go with the SSA if it was me depending on what you're building.

[landricscustoms]

i like the single side set up and the zx front... can you hold on toem for a few days for me.. life of a shop owner, everyone owes me money.

[landricscustoms]

what the hell you running over Elmo for ??!! what did he do for you?? thats just wrong willing to trade for some pain/ body work perhaps?

[6 Fingered Man]

Sorry I do all m own paint...

I don't know if i can hold the front end... I JUST put it for sale today and have a LOT of intrest in it on another forum. The rear end is for sale in the form of a complete bike on the other forum. So as long as the bike does not sell i will have it.
To be honest had I known you didn't have any $$$ I would not have offered it up so cheap. I need this stuff gone.

[landricscustoms]

iconsider the front end sold and i can give a deposit on the rear if need be. will the rear include the shock?

[landricscustoms]

is the hawk a race bike? what forum is it on and how much.. and i do have $$

[6 Fingered Man]

Yup its a racer, Its on www.hawkgtforum.com Not completed but almost all there..
$1200 is the price for it as is. I am getting a lot of offers to part out though.
http://www.hawkgtforum.com/forum/showthread.php?t=18671

[landricscustoms]

does the single side set up come with the shock?

[6 Fingered Man]

I can give you a shock with it.... but a shock for a custom application i would think you would want to hand chose... I doubt a stock hawk shock would work well for what ever you are doing as we don't even use them in hawks, 900rr shocks fit the bill but if you have no shock linkage then they are spring and valved wrong, you would want a hawk spring in it and to re-valve. F4i shocks can fit but same sort of deal there. The aftermarket hawk shocks run from $400 to $1800 and would undoubtedly be wrong for your application, unless you application is a hawk....

I would suggest figuring out what you need for suspension if what you are looking for is an overall upgrade.

[landricscustoms]

im a custom builder so i plan on fabricating everything that is needed for the shock mount. so including it would be a great thing. thank you.